✈️New Airworthiness Directive Proposed for Boeing 787 Models
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a report of multiple instances of loss of transponder for airplanes entering airspace in the presence of continuous wave (CW) interference, where the transponder did not meet the minimum operational performance standards (MOPS) requirement for transponder response. This proposed AD would require replacing the left and right integrated surveillance system processor unit (ISSPU) hardware. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Bombardier BD-700 Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that incorrect information was found in certain calculation tables in a section of the airplane flight manual (AFM) that addresses certain slat-flap conditions. This AD requires revising the Non-Normal Procedures section of the existing AFM to provide the flightcrew with corrected procedures to use in certain slat-flap conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Regulatory Changes for Standard Instrument Approach Procedures
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More🏛️Federal Mine Safety and Health Commission Meeting Notice Update
This notice announces changes to the meeting schedule for the Federal Mine Safety and Health Review Commission under the Sunshine Act. It updates the public about the new meeting date and time, providing contact information for further inquiries and referencing legal authority, but does not directly impact business operations or compliance.
Learn More✈️New Airworthiness Directives for MHI RJ Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701, and 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that new or more restrictive aircraft maintenance manual (AMM) tasks are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive AMM tasks, as specified in a Transport Canada, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Invites Comments on Pilot Medical Disclosure Information Collection
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The collection involves a short online survey gathering information on medical disclosure behaviors of working pilots. The information to be collected will be used to and/or is necessary to update the current safety risk assessments for integration into the Aviation Safety (AVS), Office of Aviation Medicine (AAM) Safety Risk Management process.
Learn More✈️FAA Final Rule on Airworthiness Directive for Airbus A350 Aircraft
The FAA is superseding Airworthiness Directive (AD) 2020-03- 14, which applied to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2020-03-14 required an inspection of affected crew oxygen cylinder assemblies for any discrepancy and replacement of discrepant crew oxygen cylinder assemblies with serviceable parts, and allowed installation of affected parts under certain conditions. Since the FAA issued AD 2020-03-14, the supplier introduced an improved crew oxygen cylinder assembly, that will ensure the correct function of the system. This AD continues to require the actions in AD 2020-03-14, requires replacement of all affected parts with redesigned parts, and also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🏛️New Regulations for Protection of Federal Property
The Department of Homeland Security (DHS) adopts this regulation to govern the protection of Federal property. DHS developed this regulation in consultation with the U.S. General Services Administration (GSA). Consistent with DHS' statutory authority, these regulations provide charging options for violations occurring on and adjacent to Federal property, update prohibited conduct to incorporate advancing technology, provide clearer public notice, and apply the regulations more uniformly to property owned, operated or secured by the Federal Government. This final rule makes no substantive changes from the proposed rule that was published in the Federal Register on January 15, 2025.
Learn More⚓Updated Regulations for Marine Events in San Diego
The Coast Guard is amending its special local regulations for recurring marine events in the San Diego Captain of the Port Zone. This final rule will amend the regulations to accurately reflect the dates of existing recurring marine events in the Sector San Diego area of responsibility (AOR).
Learn More✈️New Airworthiness Directive for Israel Aircraft Industries Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Israel Aircraft Industries Ltd. Model 1124 and 1124A airplanes. This AD was prompted by the need to ensure proper thrust reverser system status and function and to minimize the possibility of thrust reverser operation in flight or before landing. This AD requires revising the limitations and normal procedures sections of the existing airplane flight manual (AFM). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More