✈️FAA's New Airworthiness Directive for ATR Airplanes Explained
The FAA is superseding Airworthiness Directive (AD) 2023-10- 08, which applied to all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2023-10-08 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-10-08, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-10-08 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for MHI RJ Aviation Compliance
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports that the cockpit voice recorder (CVR) impact switch was installed in the wrong direction. This AD requires an inspection of the CVR impact switch installation to confirm that the reset switch faces forward, and applicable on-condition actions, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Airbus A330
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -243F, -841, and -941 airplanes. This AD was prompted by reports of loss of data synchronization between radio management panels (RMPs) and the audio management unit (AMU). This AD requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of RMP data synchronization, and the existing minimum equipment list (MEL) by removing relief for an inoperative RMP 3. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350-941 and 1041 Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports of deep spot faces on rib 9 at the lower flange bolting with the lower spar. This proposed AD would require a special detailed inspection for discrepancies of certain pylon bolts, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Airworthiness Directive Impacting Honda Aircraft
The FAA proposes to supersede Airworthiness Directive (AD) 2021-22-12, which applies to certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes. AD 2021-22-12 requires removing and cleaning the inner diameter of the flap control pushrods and repetitively applying corrosion inhibiting compound (CIC) to this area. Since the FAA issued AD 2021-22-12, new flap control pushrods have been approved that are more corrosion resistant and do not require repetitive CIC applications. This proposed AD would retain all actions of AD 2021-22- 12 and would require replacing the flap control pushrods with improved design pushrods for all airplanes affected by AD 2021-22-12, as well as for other airplanes not affected by AD 2021-22-12. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive for BRP-Rotax Engines
The FAA is adopting a new airworthiness directive (AD) for certain BRP-Rotax GmbH & Co KG (Rotax) Model 912 iSc2 Sport, 912 iSc3 Sport, 915 iSc2 C24, and 915 iSc3 C24 engines. This AD was prompted by a report of deviations during the manufacturing process that caused incorrect application of a certain thread-locker to certain sprag clutch housing and oil spray nozzles. This AD requires repetitive operational checks of the battery backup function with removal of the engine from service if insufficient battery power is found, one-time inspections of the oil spray nozzle and generator stator assembly, and, depending on the results of the inspections, replacement with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directives for Dassault Aviation Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. This AD was prompted by reported occurrences of swelling of the lithium-polymer internal and external batteries of certain electronic display units (EDUs). This AD requires modifying certain EDUs and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Air Repair Surrenders Supplemental Type Certificate Notice by FAA
This notice announces Air Repair, Inc. surrendered its supplemental type certificates (STC) SE03079AT to the FAA. This action is intended to inform all aircraft owners who may possess a product affected by these surrendered certificates.
Learn More✈️Proposed Airworthiness Directive for BAE Systems Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2023-02-06, which applies to all BAE Systems (Operations) Limited Model 4101 airplanes. AD 2023-02-06 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-02-06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require certain actions in AD 2023-02-06 and require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Correction for Boeing 737 Airworthiness Directive
The FAA is correcting an airworthiness directive (AD) that was published in the Federal Register. That AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. As published, the service information referenced in certain paragraphs of the regulatory text is incorrect, and the dates specified in the "System Airworthiness Limitation No. 3--Fan Blade Out Conditions" text and "System Airworthiness Limitation No. 4--Engine Nacelle Maintenance Errors" text of figure 1 to paragraph (j) of the regulatory text are incorrect. This document corrects those errors. In all other respects, the original document remains the same.
Learn More