✈️New Airworthiness Directive for Boeing 787 Impacts Compliance Costs
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of multiple supplier notices of escapement (NOEs) indicating that seat track splice fittings were possibly manufactured with an incorrect titanium alloy material. This AD requires an inspection of seat track splice fittings to determine the material and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Bombardier Aircraft on Hydraulic Systems
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of engine-driven pump hydraulic pressure hoses for hydraulic systems number 1 and 2 chafing against the pylon in the aft equipment bay. This AD requires an inspection of the engine-driven pump pressure hoses for any damage and minimum clearance between the engine-driven pump hydraulic pressure hose and case drain, suction pressure hose, and surrounding pylon structure; and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for ATR Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42-500 and ATR72-212A airplanes. This AD was prompted by a report of potential use of improper material during the production of vertical tail plane (VTP) fittings. This AD requires, for certain airplanes, an inspection for the material of affected fuselage-to-VTP fittings, an inspection report, and corrective actions, and, for certain other airplanes, part replacement, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA's New Airworthiness Directive for ATR Airplanes Explained
The FAA is superseding Airworthiness Directive (AD) 2023-10- 08, which applied to all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2023-10-08 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-10-08, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-10-08 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for MHI RJ Aviation Compliance
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports that the cockpit voice recorder (CVR) impact switch was installed in the wrong direction. This AD requires an inspection of the CVR impact switch installation to confirm that the reset switch faces forward, and applicable on-condition actions, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Airbus A330
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -243F, -841, and -941 airplanes. This AD was prompted by reports of loss of data synchronization between radio management panels (RMPs) and the audio management unit (AMU). This AD requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of RMP data synchronization, and the existing minimum equipment list (MEL) by removing relief for an inoperative RMP 3. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350-941 and 1041 Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports of deep spot faces on rib 9 at the lower flange bolting with the lower spar. This proposed AD would require a special detailed inspection for discrepancies of certain pylon bolts, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Airworthiness Directive Impacting Honda Aircraft
The FAA proposes to supersede Airworthiness Directive (AD) 2021-22-12, which applies to certain Honda Aircraft Company LLC (Honda) Model HA-420 airplanes. AD 2021-22-12 requires removing and cleaning the inner diameter of the flap control pushrods and repetitively applying corrosion inhibiting compound (CIC) to this area. Since the FAA issued AD 2021-22-12, new flap control pushrods have been approved that are more corrosion resistant and do not require repetitive CIC applications. This proposed AD would retain all actions of AD 2021-22- 12 and would require replacing the flap control pushrods with improved design pushrods for all airplanes affected by AD 2021-22-12, as well as for other airplanes not affected by AD 2021-22-12. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive for BRP-Rotax Engines
The FAA is adopting a new airworthiness directive (AD) for certain BRP-Rotax GmbH & Co KG (Rotax) Model 912 iSc2 Sport, 912 iSc3 Sport, 915 iSc2 C24, and 915 iSc3 C24 engines. This AD was prompted by a report of deviations during the manufacturing process that caused incorrect application of a certain thread-locker to certain sprag clutch housing and oil spray nozzles. This AD requires repetitive operational checks of the battery backup function with removal of the engine from service if insufficient battery power is found, one-time inspections of the oil spray nozzle and generator stator assembly, and, depending on the results of the inspections, replacement with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directives for Dassault Aviation Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. This AD was prompted by reported occurrences of swelling of the lithium-polymer internal and external batteries of certain electronic display units (EDUs). This AD requires modifying certain EDUs and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More