✈️Proposed Airworthiness Directive for Airbus Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and - 233 airplanes; and Model A321-211, -212, -213, -231, and -232 airplanes. This proposed AD was prompted by a report that cracks were found following fatigue tests for the new lower wing cover material on airplanes equipped with sharklets. This proposed AD would require repetitive inspections for discrepancies, and corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Special Conditions for Airbus EC175B Helicopter
These special conditions are issued for the Airbus Helicopters (Airbus) Model EC175B helicopter. This model helicopter will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category helicopters. This design feature is a 30-minute all engines operating (AEO) power rating. This rating will be used for hovering at increased power for search and rescue missions. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Learn More🚁Proposed Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N, and SA-365N1 helicopters. This proposed AD was prompted by reports of loss of tightening torque between the upper ball bearing end and the main rotor (MR) servo-control. This proposed AD would require inspecting the tightening torque and, depending on the results, taking corrective action. This proposed AD would also require reporting information. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Airworthiness Directive for Airbus Helicopters EC120 and EC130
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC120B, EC130B4, and EC130T2 helicopters. This proposed AD was prompted by a report of a missing retaining ring between the supply hose and the central supply coupling of an emergency floatation system (EFS) inflation assembly. This proposed AD would require inspecting for the presence of the retaining ring in an EFS with certain inflation assemblies installed and, depending on the results, taking corrective action. This proposed AD would also prohibit installing an EFS with those inflation assemblies installed. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Airbus Helicopters AD
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD results from a report of the loss of the tail rotor pitch control due to a fracture of the tail rotor slide of the tail rotor head (TRH) assembly. This AD requires inspecting the slide of the control plate of the TRH assembly for any score, scratch, crack, or corrosion, removing corrosion and replacing the TRH assembly, slide of the control plate, or pitch control assembly if discrepancies are found, and reporting the results of the inspection. This AD prohibits installing an affected TRH assembly unless the actions of this AD are accomplished. All of these actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A350
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by an updated stress analysis on the forward (FWD) cargo door and its attachment piano hinges that revealed a risk of cracking and crack propagation on piano hinges 2 and 3, originating from opening- closing fatigue cycles of the FWD cargo door. This AD requires an inspection of the affected parts, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New FAA Airworthiness Directive for Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA341G and SA342J helicopters. This AD was prompted by a report of a pilot collective pitch stick handle grip that broke when pulled. This AD requires replacing certain pilot collective pitch stick handle grips and prohibits installing those pilot collective pitch stick handle grips. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model SA341G and SA342J helicopters. This proposed AD was prompted by reports of disbonding of the stainless steel leading edge protection of certain part-numbered main rotor blades (MRB). This proposed AD would require repetitively tap inspecting the MRB and, depending on the results, repairing or replacing the MRB. This proposed AD would also prohibit installing those MRB unless certain requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Airworthiness Directive for Airbus A350 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports that certain lower torque links of the nose landing gear (NLG) were manufactured without bright shot peening; the omission of bright shot peening could result in reduced fatigue life of the parts. This proposed AD would require replacement of affected parts before exceeding their reduced life limit and limit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Airworthiness Directive for Airbus Helicopters Compliance
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332L1 and EC225LP helicopters. This AD was prompted by a determination of a possible interference of the hoist operator's helmet cord with the toggle switch of the hoist cable cut control. This AD requires replacing, or modifying and re- identifying, certain hoist shear toggle switch supports, and prohibits installing certain hoist shear toggle switch supports, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More