🚁Proposed Airworthiness Directive for Airbus Helicopters Safety Compliance
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-13, which applies to certain Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. AD 2020-06-13 requires determining the accumulated hours time-in-service (TIS) of certain part-numbered main gearbox (MGB) suspension bar rear attachment fittings (fittings) and bolts and establishes reduced life limits. Since the FAA issued AD 2020-06-13, it was determined that modifying the MGB suspension bar fittings link and installing improved MGB suspension bar fitting bolts are necessary. This proposed AD would require modifying the MGB suspension bar link, installing newly- designed bolts, and prohibit installing certain parts. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2015-02- 14, which applied to all Airbus SAS Model A318 series airplanes; A319- 111, -112, -113, -114, -115, -131, -132, and -133 airplanes; A320-211, -212, -214, -231, -232, and -233 airplanes; and A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. AD 2015-02-14 required repetitive inspections for cracking, damage, correct installation, and correct adjustment of the main landing gear (MLG) door hinge and actuator fittings on the keel beam, corrective actions if necessary, and revision of the existing maintenance or inspection program, as applicable. Since the FAA issued AD 2015-02-14, a new design of the MLG door keel beam hinge and actuator fitting was developed. This AD continues to require the actions specified in AD 2015-02-14, adds an optional terminating action, and revises the applicability, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Airbus A350
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Canada Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by reports that the interface pin of the secondary load path in the upper gimbal of the horizontal stabilizer trim actuator (HSTA) was incorrectly installed. This proposed AD would require a detailed visual inspection of the interface pin of the HSTA to determine if the interface pin is incorrectly installed, and applicable on-condition actions as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-18, which applies to all Airbus SAS Model A318 series airplanes; A319 series airplanes; A320-211, -212, -214, -216, -231, - 232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes; and A321 series airplanes. AD 2020-06-18 requires replacement of affected trimmable horizontal stabilizer actuators (THSAs) with serviceable THSAs. Since the FAA issued AD 2020-06-18, a new Airbus airplane model (A321-253NY) has been certified, on which affected parts could be installed in service. This proposed AD would continue to require the actions in AD 2020-06-18, would revise the applicability to include Model A321-253NY airplanes, and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Airplanes Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-112 and -132 airplanes, and Model A320-214, -232, -233, -251N, and -271N airplanes. This proposed AD was prompted by rivet holes being left unplugged after bracket relocation or removal accomplished during certain modifications, potentially resulting in fatigue damage starting from those rivet holes. This proposed AD would require a one-time special detailed inspection (SDI) of the rivet holes and applicable corrective actions; and would also allow the installation of certain modifications, provided rivets are installed after the modification; as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed FAA Airworthiness Directives for Airbus Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-23-04, which applies to all Airbus SAS Model A300 B4-600R series airplanes; all Model A300 B4-603, B4-620, and B4-622 airplanes; all Model A300 C4-605R Variant F airplanes; and certain Model A300 F4-605R airplanes. AD 2017-23-04 requires an inspection of the upper wing skin and top stringer joints, and modification of the stringer joint couplings if necessary. Since the FAA issued AD 2017-23-04, it has been determined that additional airplanes may be subject to the identified unsafe condition. This proposed AD would continue to require the actions in AD 2017-23-04 and would add airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). This proposed AD would also remove certain airplanes from the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC 130 B4 and EC 130 T2 helicopters. This proposed AD was prompted by a report of heavy damage on the fenestron due to the loss of the tail rotor (TR) blade, which broke at the TR hub tension-torsion bar (tension-torsion bar). This proposed AD would require inspecting the tension-torsion bar and, depending on the inspection results, taking corrective actions. This proposed AD would also prohibit performing maintenance using certain maintenance manuals. These proposed actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Announced
The FAA is superseding Airworthiness Directive (AD) 2021-09-14 which applied to certain Airbus Helicopters (Airbus) Model SA330J helicopters. AD 2021-09-14 required repetitively inspecting for a gap between the main gearbox (MGB) oil cooling fan assembly (fan) rotor blade and the upper section of the guide vane bearing housing, installing improved MGB fan rotor shaft bearings, and repetitively inspecting the improved MGB fan rotor shaft bearings. Since the FAA issued AD 2021-09-14, Airbus has developed modifications to the components of the MGB fan bearing assembly and issued new material regarding these modifications. This AD retains the actions required by AD 2021-09-14 and also requires installing the improved MGB fan rotor bearing assembly, which constitutes terminating action for the repetitive inspections. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A300 and A310 Series
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to certain Airbus SAS Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4- 605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This action revises the NPRM by adding airplanes to the applicability. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since this action would impose an additional burden over those in the NPRM, the FAA is requesting comments on this SNPRM.
Learn More