✈️FAA Proposes Airworthiness Directive for Airbus A350-941 and -1041
The FAA proposes to supersede Airworthiness Directive (AD) 2020-03-14, which applies to all Airbus SAS Model A350-941 and -1041 airplanes. AD 2020-03-14 requires an inspection of affected crew oxygen cylinder assemblies for any discrepancy and replacement of discrepant crew oxygen cylinder assemblies with serviceable parts, and allows installation of affected parts under certain conditions. Since the FAA issued AD 2020-03-14, the supplier introduced an improved oxygen cylinder assembly, that will ensure the correct function of the system. This proposed AD would continue to require the actions in AD 2020-03-14 and would require replacement of all affected parts with redesigned parts and would also prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350 Planes Impacting Compliance Costs
The FAA proposes to supersede Airworthiness Directive (AD) 2022-27-01, which applies to certain Airbus SAS Model A350-941 and - 1041 airplanes. AD 2022-27-01 requires replacing affected fasteners and applying additional head nut cap protection at the front and rear spars in the center wing box (CWB). Since the FAA issued AD 2022-27-01, the FAA determined that additional Airbus SAS Model A350 manufacturer serial numbers (MSNs) are affected by the same potential unsafe condition. This proposed AD would continue to require the actions in AD 2022-27-01 and would expand the applicability to include the additional Airbus SAS Model A350 MSNs, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A300 B4-2C, A300 B4-203, A300 B4-603, A300 B4-605R, A300 B4-622, A300 B4-622R, and A300 F4-605R airplanes. This proposed AD was prompted by reports of cracking of the main landing gear (MLG) support rib 5 lower flange on certain modified airplanes due to incorrect accomplishment of modification instructions. This proposed AD would require a special detailed inspection (geometrical inspection) of the MLG rib 5 lower flange holes on the left-hand wing and right- hand wing and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350 Inspection Requirements
The FAA proposes to supersede Airworthiness Directive (AD) 2023-14-09, which applies to certain Airbus SAS Model A350-941 and - 1041 airplanes. AD 2023-14-09 requires an inspection for missing or incorrectly applied sealant in the wing tanks, applicable corrective actions, and a modification to restore two independent layers of lightning strike protection. Since the FAA issued AD 2023-14-09, Airbus provided inspection instructions for a new inspection area of the upper and lower, front and rear spar corner fittings for certain airplanes. This proposed AD would continue to require the actions in AD 2023-14-09 and would require a one-time detailed inspection (DET) for missing or incorrectly applied sealant of the front and rear spars for certain airplanes and applicable on-condition actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus A300-600 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Airbus Canada Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership (ACLP) Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a design review of aircraft structural and stress reports that resulted in a revision of operational loads for some aircraft flight phases. This AD requires using a certain version of the aircraft structural repair manual (ASRP) and a review and disposition of repairs based on previous versions, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive by FAA for Airbus A350 Models
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by a determination that certain master minimum equipment list (MMEL) items do not comply with MMEL certification requirements. This proposed AD would require revising the operator's existing FAA- approved minimum equipment list (MEL), as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus A330 Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes. This AD was prompted by a report of contamination of the advanced pneumatic detector pressure switch of engine pylon fire detectors. This AD requires require replacement of the affected parts and prohibits installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Airbus A330 Maintenance
The FAA is superseding Airworthiness Directive (AD) 2023-11- 08, which applied to all Airbus SAS Model A330-841 and -941 airplanes. AD 2023-11-08 required maintenance actions, including a high-pressure valve (HPV) seal integrity test, repetitive replacement of the HPV clips, revision of the existing airplane flight manual (AFM), and implementation of updates to the FAA-approved operator's minimum equipment list (MEL). This AD was prompted by the determination that the replacement intervals required by AD 2023-11-08 must be reduced to address the unsafe condition. This AD continues to require the actions in AD 2023-11-08. This AD also reduces the HPV clip replacement intervals, requires an additional revision of the existing AFM for certain airplanes, and limits the installation of HPV clips, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directives for Airbus A321 Models
The FAA proposes to supersede Airworthiness Directive (AD) 2017-14-14, which applies to all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2017-14-14 requires repetitive inspections for cracking in the cabin floor beam junction at certain fuselage frame locations, and repair if necessary. Since the FAA issued AD 2017-14-14, further analysis determined that the compliance times for the inspections must also be based on flight hours. This proposed AD would continue to require the actions in AD 2017-14-14, and would require revised compliance times and add a provision for optional modifications, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More