✈️FAA Proposes Airworthiness Directive for Boeing 777 Models
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-200LR Series and 777-300ER Series airplanes. This proposed AD was prompted by reports of chafing and arcing damage on the light emitting diode (LED) sidewall wire bundles. This proposed AD would require a general visual inspection (GVI) of the sidewall light for chafing damage and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer Airplanes' Safety Compliance
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model ERJ 190-300 and ERJ 190-400 airplanes. This AD was prompted by a report of a MAU 3B failure which led to brake fault advisory messages followed by loss of normal braking that was undetected until the brakes were pressed by the pilots. This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures associated with the failure of certain modular avionics units (MAUs), as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for ATR Airplanes Mandates Inspections
The FAA is adopting a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42-500 and ATR72-212A airplanes. This AD was prompted by a report of the possible use of improper material during the manufacturing of vertical stabilizer to horizontal stabilizer junction fittings. This AD requires inspections of affected parts, applicable repairs, and eventual replacement of certain affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚼New Safety Standard for Stationary Activity Centers Effective July 2025
In June 2019, the U.S. Consumer Product Safety Commission (CPSC or Commission) published a consumer product safety standard for stationary activity centers pursuant to section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). The Commission's mandatory standard incorporates by reference ASTM F2012-18[egr]\1\, Standard Consumer Safety Performance Specification for Stationary Activity Centers. The CPSIA sets forth a process for updating mandatory standards for durable infant or toddler products that are based on a voluntary standard, when a voluntary standards organization revises the standard. In November 2024, ASTM published a revised voluntary standard. This direct final rule updates the mandatory standard for stationary activity centers to incorporate by reference the 2024 version of ASTM F2012, which the Commission has allowed to become the mandatory standard under section 104. The purpose of the direct final rule is to conform the Code of Federal Regulations (CFR) to the correct version of ASTM F2012 to provide an accurate reference to the standard that will be enforced as a mandatory rule.
Learn More✈️Proposed Airworthiness Directive on Airbus SAS
The FAA proposes to supersede Airworthiness Directive (AD) 2016-14-03, which applies to all Airbus SAS Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, - 212, -213, -231, and -232 airplanes. AD 2016-14-03 requires reinforcing the forward pressure bulkhead at a certain stringer on both the left- hand and right-hand sides and doing related investigative and corrective actions if necessary. Since the FAA issued AD 2016-14-03, new crack findings have prompted the need for repetitive inspections of the area. This proposed AD would continue to require the actions in AD 2016-14-03, add repetitive inspections of structure at a certain frame and applicable corrective actions, provide a terminating action for the repetitive inspections, and remove airplanes from the applicability, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚚FMCSA Renewed Exemptions for Drivers with Epilepsy and Seizures
FMCSA announces its decision to renew exemptions for 19 individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have "no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV." The exemptions enable these individuals who have had one or more seizures and are taking anti-seizure medication to continue to operate CMVs in interstate commerce.
Learn More✈️Proposed Airworthiness Directive for Embraer S.A. Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for all Embraer S.A. Model EMB-545 and EMB-550 airplanes. This proposed AD was prompted by a jamming failure of the main door lock sensor. This proposed AD would require repetitive main door sensor operational tests, repetitive lubrication of the main door sensor mechanism, and on-condition actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350 Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by a determination that the applicable aircraft flight manual (AFM) was providing an incorrect value for maximum cumulative taxi time in freezing fog conditions. This proposed AD would require revising the existing AFM to provide the flightcrew with normal procedures to follow under certain conditions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Bombardier Aircraft Safety Updates
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by a report that incorrect information was found in certain calculation tables in a section of the airplane flight manual (AFM) that addresses certain slat-flap conditions. This proposed AD would require revising the Non-Normal Procedures section of the existing AFM to provide the flightcrew with corrected procedures to use in certain slat-flap conditions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚧Notice of Applications for Special Permits in Hazardous Materials
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein.
Learn More