✈️Establishment of Class E Airspace in Zuni, NM by FAA
This action proposes to establish Class E airspace at Zuni, NM. The FAA is proposing this action to support new instrument procedures and to support instrument flight rule (IFR) operations.
Learn More✈️New Airworthiness Directives for MHI RJ Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701, and 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that new or more restrictive aircraft maintenance manual (AMM) tasks are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive AMM tasks, as specified in a Transport Canada, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Class D and E Airspace Amendment Over Hickory, NC
This action revises an earlier notice of proposed rulemaking (NPRM) that the FAA published in the Federal Register on May 22, 2025, by replacing an incorrect reference point within the Class D and Class E2 airspace descriptions and by adding a reference to the Tawba Nondirectional Radio Beacon (NDB) to the Class E5 airspace description. This revised action continues to propose amending the Class D and Class E surface airspace at Hickory Regional Airport, Hickory NC, by increasing the radius and establishing an extension to the surface area due to standard instrument approach procedure and runway configuration changes. Additionally, this action continues to propose amending Class E airspace extending upward from 700 feet above the surface for Hickory Regional Airport, Hickory, NC by increasing the radius and adding an extension. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Learn More✈️Amendment of Class D Airspace at Laurence G. Hanscom Field
This action updates an airspace legal description by correcting the airport name at Laurence G. Hanscom Field, Bedford, MA. This action also replaces the reference to "Airport/Facility Directory" within the legal description with "Chart Supplement". This action does not change the airspace boundaries or operating requirements.
Learn More🏥Establishment of Class E Airspace in Blue Hill, ME
This action establishes Class E airspace extending upward from 700 feet above the surface for Blue Hill, ME, by adding airspace for Blue Hill Memorial Hospital Heliport, Blue Hill, ME. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this heliport.
Learn More✈️Withdrawal of Proposed Airspace Amendment for Morgantown, WV
This action withdraws the notice of proposed rulemaking (NPRM) published in the Federal Register on March 31, 2025, proposing to amend Class D and Class E airspace at Morgantown, WV. The FAA has determined that withdrawal of that NPRM is warranted as new airspace data have been received which significantly change the requirements for the proposed airspace. FAA expects to publish a new NPRM to amend the Class D and Class E airspace at Morgantown, WV, after assessing the new data.
Learn More🚁FAA Issues Airworthiness Directive for Robinson Helicopter Inspections
The FAA is superseding Airworthiness Directive (AD) 2024-19-11 for all Robinson Helicopter Company Model R44 and R44 II helicopters. AD 2024-19-11 required visually inspecting a certain flex plate assembly (flex plate) and certain clutch shaft forward yokes (yokes), including each flex plate bolt, and depending on the results, taking corrective actions. AD 2024-19-11 also required removing certain yokes from service within a specified threshold, or as an alternative, performing in-depth inspections. Since the FAA issued AD 2024-19-11, it has been determined that clarifications regarding the alternative inspections are necessary. This AD requires the actions of AD 2024-19- 11 and clarifies that the alternative inspections are repetitive and adds a particular paint remover option to use when performing those alternative inspections. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Israel Aircraft Industries Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Israel Aircraft Industries Ltd. Model 1124 and 1124A airplanes. This AD was prompted by the need to ensure proper thrust reverser system status and function and to minimize the possibility of thrust reverser operation in flight or before landing. This AD requires revising the limitations and normal procedures sections of the existing airplane flight manual (AFM). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Requires Inspections
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS350B2, AS350B3, and EC130B4 helicopters. This AD was prompted by reports of broken cargo swing frames and the determination to change an existing repetitive inspection threshold. This AD requires repetitively inspecting the cargo swing installation and frame and, depending on the results, performing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A350-941
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 airplanes. This AD was prompted by an inspection that found several anodic burns on the main landing gear (MLG) bogie beam axles following a high velocity oxygen-fuel (HVOF) stripping process. This AD requires replacement of affected MLG bogie beam axles and prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More