✈️New Airworthiness Directive for Boeing 737 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Amendment and Revocation of Domestic VOR Airways by FAA
This action amends domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-3, V-35, V-51, V-97, V- 157, V-159, V-225, V-437, V-492, V-521, and V-537 and revokes VOR Federal Airways V-295, V-529, and V-601 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Cypress, FL (CYY), VOR/Distance Measuring Equipment (VOR/DME); the La Belle, FL (LBV), VOR/Tactical Air Navigation (VORTAC); the Pahokee, FL (PHK), VOR/DME; and the Treasure, FL (TRV), VORTAC. This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Learn More✈️New Airworthiness Directive for Boeing 757 Aircraft Inspections
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a report indicating an operator has found cracks on three Model 757-200PF airplanes at the main deck cargo door cutout forward and aft hinge attachment holes. This AD requires a maintenance record check for repairs at the forward and aft hinge areas of the main deck cargo door cutout; repetitive open-hole high frequency eddy current (HFEC) inspections for cracks in the unrepaired areas of the bear strap, skin, doubler, and upper sill chord at the main deck cargo door forward and aft hinge attachment holes; and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive Requires Software Updates for Boeing Aircraft
The FAA is superseding Airworthiness Directive (AD) 2020-03- 20, which applied to certain The Boeing Company Model MD-11, MD-11F, and 717-200 airplanes; all Model 737-8 and 737-9 airplanes; all Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes; certain Model 747-400 and 747-400F series airplanes; certain Model 757 and 767 airplanes; and all Model 777 airplanes. AD 2020-03-20 required revising the existing airplane flight manual (AFM) to include a limitation to prohibit operations that require less than 0.3 required navigational performance (RNP) within a specified area for airplanes having a certain multimode receiver (MMR) with certain software installed. This AD was prompted by reports from Boeing of simultaneous MMR resets related to an error in calculating Coordinated Universal Time (UTC). This AD requires the actions in AD 2020-03-20, removes an airplane model from the applicability, and would also require installing certain MMR operational software (OPS). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Embraer Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-12-12, which applies to all Embraer S.A. Model ERJ 170 airplanes and Model ERJ 190-100 STD, -100 LR, -100 ECJ, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. AD 2020-12-12 requires repetitive detailed inspections for cracking of the engine inboard and outboard engine pylon lower link lugs, and repair if necessary. Since the FAA issued AD 2020-12-12, it was determined that certain compliance times must be reduced. This proposed AD would continue to require the actions in AD 2020-12-12, with revised compliance times, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes New Airworthiness Directive for Leonardo Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Leonardo S.p.a. Model A119 and AW119 MKII helicopters. This proposed AD was prompted by a report of an electrical failure of the starter-generator, due to a rupture of the drive shaft, which resulted in a partial loss of battery power. This proposed AD would require installing a battery discharge detector and revising the existing Rotorcraft Flight Manual (RFM) for the helicopter, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Amendment to Jet Route J-96 Near Cimarron, NM
This action proposes to remove a segment of Jet Route J-96 between the Cimarron, NM (CIM), Very High Frequency Omnidirectional Range (VOR)/Tactical Air Navigation (VORTAC) and the Garden City, KS (GCK), VORTAC navigational aids (NAVAID). The FAA is proposing this action due to the Cimarron VORTAC radials between 045[deg] and 055[deg], stated in degrees magnetic (M) north, that make up the route segment east of Cimarron, NM, being unusable since 2020.
Learn More✈️Special Conditions for Airbus A321neo Seating Safety Regulations
These special conditions are issued for the Airbus Model A321neo ACF and A321neo XLR airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a single-occupant oblique seat with an airbag and 3-point or pretensioner restraint system positioned at a 49-degree angle from the cabin centerline. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Learn More🚁Proposed Airworthiness Directive for Leonardo Helicopters by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model A109E, A109S, and AW109SP helicopters. This proposed AD was prompted by reports of incorrect installation of the motor (MTR) cables and the bonding braids connected to the engine fire extinguisher bottles. This proposed AD would require inspecting the cables and bonding braids installation and, depending on the results, accomplishing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Seeks Comments on Non-Federal Navigation Facilities Regulations
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves aerial navigation aids (NavAids), electrical/electronic facilities, owned and operated by non-federal sponsors for use by the flying public. "Non-Federal sponsors" refers to entities such as State and local governments, businesses, and private citizens. The information to be collected is necessary to ensure that operation and maintenance of these non-federally owned facilities is in accordance with FAA safety standards. The FAA is not changing its information-collection practices pertaining to non-Federal facilities. It is merely renewing its legal authority to collect that information.
Learn More