✈️FAA Corrects RNAV Routes in Eastern US for Aviation Compliance
This action corrects a final rule published by the FAA in the Federal Register on February 3, 2025, that establishes United States Area Navigation (RNAV) Route T-553 and amends RNAV Routes T-356, T-358, and T-479 in the eastern United States. This action adds the Martinsburg, WV (MRB), Very High Frequency Omnidirectional Range/ Tactical Air Navigation (VORTAC) to the route description of RNAV Route T-356.
Learn More✈️FAA Proposes Amendment of RNAV Routes in Eastern United States
This action proposes to amend United States Area Navigation (RNAV) Routes Q-64 and T-414, and establish RNAV Routes T-461 and T-463 in the eastern United States. This action supports FAA Next Generation Air Transportation System (NextGen) efforts to provide a modern RNAV route structure to improve the safety and efficiency of the National Airspace System (NAS).
Learn More✈️Proposed Airworthiness Directive for Boeing 787 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by reports that very high frequency (VHF) radio frequencies transfer between the active and standby windows of the tuning control panel (TCP) without flightcrew input. The uncommanded frequency changes could result in missed communications between the flightcrew and Air Traffic Control. This proposed AD would require updating the TCP operational software (OPS) and performing a software configuration check. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Airworthiness Directive for Airbus Helicopters MBB-BK 117
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2 and MBB-BK 117 D-2 helicopters. This proposed AD was prompted by reports of significant wear of the control rod assembly and pitch link assembly spherical bearings. This proposed AD would require measuring the radial play of certain control rod assembly and pitch link assembly spherical bearings, reporting the results, and depending on the results, taking corrective action. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. This proposed AD would also prohibit installing certain control rod assemblies and pitch link assemblies unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚀FAA Notice on Commercial Space Transportation Information Collection
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information will determine if applicant proposals for conducting commercial space launches can be accomplished according to regulations issued by the Office of the Associate Administrator for Commercial Space Transportation. The Federal Register notice with a 60- day comment period soliciting comments on the following collection of information was published on June 24, 2024. The Commercial Space Launch Act of 1984, as recodified, requires certain data be provided in applying for a license to conduct commercial space launch activities. These data are required to demonstrate to the Federal Aviation Administration (FAA), Associate Administrator for Commercial Space Transportation (AST), that a license applicant's proposed activities meet applicable public safety, national security, and foreign policy interests of the United States.
Learn More✈️FAA Issues Airworthiness Directive for Rolls-Royce Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Model Trent 1000-AE3, Trent 1000- CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, Trent 1000-R3, Trent 7000-72, and Trent 7000-72C engines. This AD was prompted by reports of cracked intermediate pressure compressor (IPC) shaft assembly front air seals. This AD requires an inspection of the affected IPC shaft assembly for cracking and, depending on the results of the inspection, repetitive inspections or replacement of the IPC shaft assembly front air seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Austro Engine GmbH Engines
The FAA is superseding Airworthiness Directive (AD) 2023-20-03 for certain Austro Engine GmbH Model E4 and E4P engines. AD 2023-20-03 required repetitive engine oil analysis for aluminum content outside the acceptable limits and, if necessary, replacement of the pistons, piston rings, con-rods assembly, and crankcase or, as an alternative, replacement of the engine core. Since the FAA issued AD 2023-20-03, the manufacturer identified errors in the lists of affected engines and provided updated information, which prompted this AD. This AD retains the requirements of AD 2023-20-03, adds compliance times for additional affected engine serial numbers, and removes certain engine serial numbers from the applicability of the existing AD. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Model AS350B2, AS350B3, and EC130B4 helicopters. This proposed AD was prompted by reports of broken cargo swing frames and the determination to change an existing repetitive inspection threshold. This proposed AD would require repetitively inspecting the cargo swing installation and frame and, depending on the results, corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes New Regulations for Safran Helicopter Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all Safran Helicopter Engines, S.A. (Safran) Model ARRIUS 2B2 engines. This proposed AD was prompted by a manufacturer review of collected data from in-service engines that indicated the preference injector may clog over time caused by fuel coking, which decreases the permeability of the preference injector. This proposed AD would require initial and repetitive non-extinguishing tests for engine flameout and replacement of the preference injector if necessary, a one-time modification (software upgrade) of the electronic engine control unit (EECU) and, for certain engines, repetitive replacements of the preference injector, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Airworthiness Directive for Pilatus Aircraft in 2025
The FAA proposes to supersede Airworthiness Directive (AD) 2023-26-05, which applies to certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. AD 2023-26-05 requires periodic replacement of affected titanium threaded bolts, a one-time inspection of the rudder mass balance arm and other elements of the rudder trim tab installation for correct attachment, damage (gouges), cracks, deformation, surface finish, and corrosion on any surrounding parts and, depending on findings, the accomplishment of applicable corrective actions. Since the FAA issued AD 2023-26-05, it was determined that some batches of titanium bolts had variations in the microstructure that could affect the fatigue characteristics. This proposed AD would require replacing affected short rudder-trim control rod assemblies with serviceable rudder-trim control rod assemblies having threaded steel bolts and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More