✈️FAA Notice on Petition for Exemption by Czechmate L-39 Demo Team
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Learn More✈️New FAA Airworthiness Directives Impact Boeing 777 Maintenance Costs
The FAA is superseding Airworthiness Directive (AD) 2012-07- 06, which applied to certain The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes. AD 2012-07-06 required revising the maintenance program to update inspection requirements to detect fatigue cracking of principal structural elements (PSEs). This AD was prompted by new revisions to the airworthiness limitations of the maintenance planning document and damage tolerance rating check form document. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airspace Amendment in Little Rock, Arkansas
This action proposes amending Class D airspace and establishing Class E airspace extending upward from the surface above Little Rock AFB, Little Rock, AR, as the air traffic control tower will shift to part-time operations. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Learn More✈️FAA Seeks Comments on Air Carrier Maintenance Requirements
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves information collected which will be used by air carriers and by the FAA to adequately target its inspection resources for surveillance and make accurate risk assessments.
Learn More✈️FAA Airworthiness Directive for Boeing
The FAA is superseding Airworthiness Directive (AD) 2021-09- 06, which applied to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. AD 2021-09-06 required repetitive inspections for cracking of the left- and right-hand outboard chords of certain frame fittings and failsafe straps at a certain station around eight fasteners, and repair if any cracking is found. This AD was prompted by additional reports of cracking in the area and a subsequent determination that additional inspections are needed to address the unsafe condition. This AD requires repetitive detailed and ultrasonic inspections for cracking of the left- and right-hand sides of certain frame fittings and failsafe straps, and repair if any cracking is found. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A350
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by an updated stress analysis on the forward (FWD) cargo door and its attachment piano hinges that revealed a risk of cracking and crack propagation on piano hinges 2 and 3, originating from opening- closing fatigue cycles of the FWD cargo door. This AD requires an inspection of the affected parts, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Class E Airspace Establishment in Blue Hill, ME
This action proposes to establish Class E airspace extending upward from 700 feet above the surface for Blue Hill, ME, by adding airspace for Blue Hill Memorial Hospital Heliport, Blue Hill, ME. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this heliport.
Learn More🚁New FAA Airworthiness Directive for Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA341G and SA342J helicopters. This AD was prompted by a report of a pilot collective pitch stick handle grip that broke when pulled. This AD requires replacing certain pilot collective pitch stick handle grips and prohibits installing those pilot collective pitch stick handle grips. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Airworthiness Directive for Dassault FALCON 7X
The FAA proposes to adopt a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X airplanes. This proposed AD was prompted by hydraulic leakage from the spoiler power control unit (SPPCU) in service. Relevant investigations determined that, following certain failures, the spoiler electrical control unit (SPECU) can deliver an untimely and permanent activation command to the SPPCU standby electrical pump, which can possibly result in overheating and significant hydraulic leakage of the unit. This proposed AD would require replacement of affected SPECUs, and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Bombardier Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This proposed AD was prompted by reports that the flap system on-board recorder (FSOBR) interfaces with the flap control unit signals and may result in the flap control unit monitors tripping, causing Flap Fail messages and possibly an uncommanded flap movement. This proposed AD would require the disconnection of the FSOBR and prohibit future installation of this system. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More