✈️FAA Modifies Class D and E Airspace at Abbotsford Airport
The FAA is correcting a final rule that published in the Federal Register on December 11, 2024. The final rule modified administrative portions of the Class D and Class E airspace legal descriptions for Abbotsford Airport, Abbotsford, BC. This action corrects errors in the Class D airspace legal description.
Learn More✈️New Airworthiness Directive for DAHER Aerospace TBM 700 Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain DAHER AEROSPACE (DAHER) Model TBM 700 airplanes. This AD was prompted by certain existing emergency procedures in the pilot's operating handbook (POH) that cannot be fully accomplished since certain equipment cannot be disconnected by the pilot(s) from the flight deck. This AD requires revising the existing POH for your airplane to provide the flight crew with corrected emergency procedures. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer EMB-120 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-120, -120ER, -120FC, -120QC, and -120RT airplanes. This AD was prompted by a structural assessment, which found that the fuselage longitudinal skin splice and panel between certain frames are susceptible to cracking. This AD requires performing repetitive inspections of the fuselage center I longitudinal skin splice and applicable corrective actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS A321 Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, - 271NX, and -272NX airplanes. This proposed AD was prompted by the identification of an erroneous value of the main landing gear (MLG) tire width in the aircraft data files used for aircraft performance computation. This proposed AD would require revising the existing airplane flight manual (AFM) to incorporate a complementary performance data file (CPDF) update as specified in a European Union Aviation Safety Agency (EASA), which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive on Buckle Assemblies for Airplanes
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to all airplanes with certain Pacific Scientific Company rotary buckle assemblies (buckles) installed. This action revises the NPRM by expanding the applicability and updating the referenced material. As an option to the actions proposed by this SNPRM, this SNPRM would allow removing the male side from the lap of the restraint system assembly and installing a placard stating that use of the seat is prohibited; use of that crewmember seat or passenger seat would then be prohibited until the actions proposed by this SNPRM are accomplished and the male side from the lap of the restraint system assembly is reinstalled. The NPRM was prompted by a report of a manufacturing defect in the screws used inside the buckle; this SNPRM is prompted by the discovery that additional screws are affected by the unsafe condition. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over that in the NPRM, the FAA is requesting comments on this SNPRM.
Learn More✈️FAA Airworthiness Directive Requires Software Updates for Boeing Aircraft
The FAA is superseding Airworthiness Directive (AD) 2020-03- 20, which applied to certain The Boeing Company Model MD-11, MD-11F, and 717-200 airplanes; all Model 737-8 and 737-9 airplanes; all Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes; certain Model 747-400 and 747-400F series airplanes; certain Model 757 and 767 airplanes; and all Model 777 airplanes. AD 2020-03-20 required revising the existing airplane flight manual (AFM) to include a limitation to prohibit operations that require less than 0.3 required navigational performance (RNP) within a specified area for airplanes having a certain multimode receiver (MMR) with certain software installed. This AD was prompted by reports from Boeing of simultaneous MMR resets related to an error in calculating Coordinated Universal Time (UTC). This AD requires the actions in AD 2020-03-20, removes an airplane model from the applicability, and would also require installing certain MMR operational software (OPS). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for MHI RJ Aviation Aircraft
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by the discovery of ten ultrasonic inspections associated with airworthiness limitations (AWL) tasks and structural deviation inspection requirements (SDIR) tasks potentially not detecting cracks. This AD requires repetitive ultrasonic inspections of certain structural areas for cracking, and prohibits use of the previous revisions of certain procedures and mandates the use of the revised procedures when performing the inspections required by the associated AWL and SDIR tasks, as specified in a Transport Canada AD, which is incorporated by reference (IBR). This AD also requires repair of cracking. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Final Rule on Airworthiness Directives for Airbus SAS Airlines
The FAA is superseding Airworthiness Directive (AD) 2022-22- 10, which applied to certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2022-22-10 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2022- 22-10 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 747 Models Requires Compliance
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company (Boeing) Model 747-100, 747-100B, 747-100B SUD, 747- 200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SP, and 747SR series airplanes. This AD was prompted by a report of improper inner diameter grinding of landing gear outer cylinders, resulting in possible heat damage to the outer cylinder of the nose landing gear (NLG), body landing gear (BLG), and wing landing gear (WLG). This AD requires replacing any affected outer cylinders. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 737 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More