✈️Proposed Airworthiness Directive for Airbus SAS A321 Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, - 271NX, and -272NX airplanes. This proposed AD was prompted by the identification of an erroneous value of the main landing gear (MLG) tire width in the aircraft data files used for aircraft performance computation. This proposed AD would require revising the existing airplane flight manual (AFM) to incorporate a complementary performance data file (CPDF) update as specified in a European Union Aviation Safety Agency (EASA), which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive on Buckle Assemblies for Airplanes
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to all airplanes with certain Pacific Scientific Company rotary buckle assemblies (buckles) installed. This action revises the NPRM by expanding the applicability and updating the referenced material. As an option to the actions proposed by this SNPRM, this SNPRM would allow removing the male side from the lap of the restraint system assembly and installing a placard stating that use of the seat is prohibited; use of that crewmember seat or passenger seat would then be prohibited until the actions proposed by this SNPRM are accomplished and the male side from the lap of the restraint system assembly is reinstalled. The NPRM was prompted by a report of a manufacturing defect in the screws used inside the buckle; this SNPRM is prompted by the discovery that additional screws are affected by the unsafe condition. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over that in the NPRM, the FAA is requesting comments on this SNPRM.
Learn More✈️FAA Airworthiness Directive Requires Software Updates for Boeing Aircraft
The FAA is superseding Airworthiness Directive (AD) 2020-03- 20, which applied to certain The Boeing Company Model MD-11, MD-11F, and 717-200 airplanes; all Model 737-8 and 737-9 airplanes; all Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes; certain Model 747-400 and 747-400F series airplanes; certain Model 757 and 767 airplanes; and all Model 777 airplanes. AD 2020-03-20 required revising the existing airplane flight manual (AFM) to include a limitation to prohibit operations that require less than 0.3 required navigational performance (RNP) within a specified area for airplanes having a certain multimode receiver (MMR) with certain software installed. This AD was prompted by reports from Boeing of simultaneous MMR resets related to an error in calculating Coordinated Universal Time (UTC). This AD requires the actions in AD 2020-03-20, removes an airplane model from the applicability, and would also require installing certain MMR operational software (OPS). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for MHI RJ Aviation Aircraft
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by the discovery of ten ultrasonic inspections associated with airworthiness limitations (AWL) tasks and structural deviation inspection requirements (SDIR) tasks potentially not detecting cracks. This AD requires repetitive ultrasonic inspections of certain structural areas for cracking, and prohibits use of the previous revisions of certain procedures and mandates the use of the revised procedures when performing the inspections required by the associated AWL and SDIR tasks, as specified in a Transport Canada AD, which is incorporated by reference (IBR). This AD also requires repair of cracking. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Final Rule on Airworthiness Directives for Airbus SAS Airlines
The FAA is superseding Airworthiness Directive (AD) 2022-22- 10, which applied to certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2022-22-10 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2022- 22-10 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 747 Models Requires Compliance
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company (Boeing) Model 747-100, 747-100B, 747-100B SUD, 747- 200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SP, and 747SR series airplanes. This AD was prompted by a report of improper inner diameter grinding of landing gear outer cylinders, resulting in possible heat damage to the outer cylinder of the nose landing gear (NLG), body landing gear (BLG), and wing landing gear (WLG). This AD requires replacing any affected outer cylinders. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 737 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Amendment and Revocation of Domestic VOR Airways by FAA
This action amends domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-3, V-35, V-51, V-97, V- 157, V-159, V-225, V-437, V-492, V-521, and V-537 and revokes VOR Federal Airways V-295, V-529, and V-601 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Cypress, FL (CYY), VOR/Distance Measuring Equipment (VOR/DME); the La Belle, FL (LBV), VOR/Tactical Air Navigation (VORTAC); the Pahokee, FL (PHK), VOR/DME; and the Treasure, FL (TRV), VORTAC. This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Learn More✈️New Airworthiness Directive for Boeing 757 Aircraft Inspections
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a report indicating an operator has found cracks on three Model 757-200PF airplanes at the main deck cargo door cutout forward and aft hinge attachment holes. This AD requires a maintenance record check for repairs at the forward and aft hinge areas of the main deck cargo door cutout; repetitive open-hole high frequency eddy current (HFEC) inspections for cracks in the unrepaired areas of the bear strap, skin, doubler, and upper sill chord at the main deck cargo door forward and aft hinge attachment holes; and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Embraer Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-25- 07, which applied to all Embraer S.A. Model ERJ 170-100 LR, -100 STD, - 100 SE, and -100 SU airplanes; and Model ERJ 170-200 LR, -200 SU, -200 STD, and -200 LL airplanes. AD 2022-25-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require all actions in AD 2022-25-07 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, and certain structural modifications, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More