🚁Proposed Airworthiness Directive for Airbus Helicopters Safety Compliance
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-13, which applies to certain Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. AD 2020-06-13 requires determining the accumulated hours time-in-service (TIS) of certain part-numbered main gearbox (MGB) suspension bar rear attachment fittings (fittings) and bolts and establishes reduced life limits. Since the FAA issued AD 2020-06-13, it was determined that modifying the MGB suspension bar fittings link and installing improved MGB suspension bar fitting bolts are necessary. This proposed AD would require modifying the MGB suspension bar link, installing newly- designed bolts, and prohibit installing certain parts. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Notice
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves soliciting project information for the Infrastructure Investment and Jobs Act (IIJA) Airport Terminal, Tower and Airport Infrastructure Grant Funding Reallocation Programs. The information to be collected will be used to determine projects to be awarded IIJA competitive grants.
Learn More✈️New Compliance Requirements for Airport Instrument Procedures
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More✈️New Safety Standards for Boeing 777-9 by FAA
These special conditions are issued for the Boeing Company (Boeing) Model 777-9 series airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is electrical and electronic systems that perform critical functions, the loss of which could be catastrophic to the airplane. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Learn More✈️FAA Notice on Brunner Aerospace Petition for Exemption
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Learn More✈️FAA Final Rule on Standard Instrument Approach Procedures
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More✈️FAA Seeks Public Comments on Safety Assurance System Information Collection
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The SAS external portal is a web-based tool developed for applicants and certificate holders (also referred to as external users) to exchange information with Flight Standards (FS) employees, primarily to collaborate and communicate with their FS counterparts regarding initial certification applications, and requesting new programs for acceptance and approval.
Learn More✈️FAA Requests Comments on Aviation Insurance Information Collection
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 30, 2024. The collection involves obtaining information from air carriers to establish legally binding aviation war risk insurance policies with the FAA. The information to be collected is necessary to determine whether applicants are eligible for insurance and the amount of coverage necessary; to populate insurance policies with business information; and to meet conditions of coverage required by each insurance policy.
Learn More✈️FAA Issues Airworthiness Directive for Airbus SAS Aircraft Compliance
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, and -272NX airplanes. This AD was prompted by the identification of an erroneous value of the main landing gear (MLG) tire width in the aircraft data files used for aircraft performance computation. This AD requires revising the existing airplane flight manual (AFM) to incorporate a complementary performance data file (CPDF) update as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directives for Embraer Aircraft Compliance
The FAA is superseding Airworthiness Directive (AD) 2006-20- 08, which applied to all Embraer S.A. Model EMB-145, -145ER, -145MR, - 145LR, -145XR, -145MP, and -145EP airplanes. AD 2006-20-08 required repetitive inspections to detect cracking or failure of the rod ends and fittings of the aileron power control actuator (PCA), and corrective actions if necessary, and provided an optional terminating action. This AD was prompted by a determination that there was an error in identifying a maintenance task number. This AD continues to require the actions in AD 2006-20-08 and corrects an error in a task number, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More