🚁FAA Issues Airworthiness Directive for Leonardo Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.A. Model A109E, A109S, and AW109SP helicopters. This AD was prompted by reports of incorrect installation of the motor (MTR) cables and the bonding braids connected to the engine fire extinguisher bottles. This AD requires inspecting the cables and bonding braids installation and, depending on the results, accomplishing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New FAA Airworthiness Directive for Leonardo S.p.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.A. Model A119 and AW119 MKII helicopters. This AD was prompted by a report of an electrical failure of the starter-generator, due to a rupture of the drive shaft, which resulted in a partial loss of battery power. This AD requires installing a battery discharge detector and revising the existing Rotorcraft Flight Manual (RFM) for the helicopter. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC 130 B4 and EC 130 T2 helicopters. This proposed AD was prompted by a report of heavy damage on the fenestron due to the loss of the tail rotor (TR) blade, which broke at the TR hub tension-torsion bar (tension-torsion bar). This proposed AD would require inspecting the tension-torsion bar and, depending on the inspection results, taking corrective actions. This proposed AD would also prohibit performing maintenance using certain maintenance manuals. These proposed actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes New Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Deutschland GmbH (AHD) Model MBB-BK 117 D-3 helicopters. This proposed AD was prompted by reports of momentary direct current (DC) power interruption in flight of both essential busses. This proposed AD would require revising the existing rotorcraft flight manual (RFM) for your helicopter, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing Airplanes Addresses Elevator Safety
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD- 83), DC 9-87 (MD-87), and MD-88 airplanes, and Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD was prompted by the discovery of jammed elevators during takeoff. This AD requires revising the "Certificate Limitations" section of the existing airplane flight manual (AFM) to include a procedure to confirm elevator surfaces are not jammed in the trailing edge down (TED) position. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Announced
The FAA is superseding Airworthiness Directive (AD) 2021-09-14 which applied to certain Airbus Helicopters (Airbus) Model SA330J helicopters. AD 2021-09-14 required repetitively inspecting for a gap between the main gearbox (MGB) oil cooling fan assembly (fan) rotor blade and the upper section of the guide vane bearing housing, installing improved MGB fan rotor shaft bearings, and repetitively inspecting the improved MGB fan rotor shaft bearings. Since the FAA issued AD 2021-09-14, Airbus has developed modifications to the components of the MGB fan bearing assembly and issued new material regarding these modifications. This AD retains the actions required by AD 2021-09-14 and also requires installing the improved MGB fan rotor bearing assembly, which constitutes terminating action for the repetitive inspections. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Bombardier BD-100-1A10 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A300 and A310 Series
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to certain Airbus SAS Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4- 605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This action revises the NPRM by adding airplanes to the applicability. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since this action would impose an additional burden over those in the NPRM, the FAA is requesting comments on this SNPRM.
Learn More✈️Proposed Airworthiness Directive for Airbus Aircraft Maintenance
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A318-111, -112, -121, and -122 airplanes; A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and - 171N airplanes; A320-211, -212, -214, -216, -231, -232, -233, -251N, - 252N, -253N, -271N, -272N, and -273N airplanes; and A321-111, -112, - 131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, - 251NX, -252NX, -253NX, -253NY, -271NX, and -272NX airplanes. This proposed AD was prompted by a determination that new airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Thommen Aircraft Equipment
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. The AD applies to certain Thommen Aircraft Equipment AG (THOMMEN) AC32 Digital Air Data Computers (ADCs). As published, there were typographical errors in the some of the aircraft models in the applicability table. This document corrects those errors. In all other respects, the original document remains the same.
Learn More