✈️Proposed Airworthiness Directive for Airbus Fuel Transfer Valves
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by reports of certain fuel transfer float valves failing in the closed position, preventing normal fuel transfer between the center and wing fuel tanks. This proposed AD would require replacing the existing fuel transfer float valves on airplanes that are approved for extended-range twin-engine operation performance standards (ETOPS). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed FAA Airworthiness Directive for Airbus Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A318-111, -112, and -122; A319-111, -112, -113, -114, -115, -131, -132, and -133; A320-211, -212, -214, -216, - 232, -233, -251N, -252N, -253N, -271N, -272N, and -273N; and A321-211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, - 252NX, -253NX, -271NX, -272NX airplanes. This proposed AD was prompted by the detection of a deviation from the manufacturing process during a review of the cold working process in the assembly line. This proposed AD would require repetitive special detailed inspections (SDIs) and rototest or high frequency eddy current (HFEC) and rototest inspections of the affected fasteners and fastener holes, and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Canada Models BD-500-1A10/1A11
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by the discovery that titanium fasteners had been incorrectly installed in the butt strap at the outer wing box lower skin to center wing box interface in lieu of the correct nickel alloy fasteners. This proposed AD would require the identification of fasteners installed in the butt strap at the outer wing box lower skin to center wing box interface, and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus A350 Evacuation Slides
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a reported occurrence where the decorative cover to an evacuation slide detached in flight, with the slide pack found resting unsecured on the cabin floor. This AD requires accomplishing a visual inspection of the latch hook and, if necessary, corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive for Airbus SAS
The FAA is superseding Airworthiness Directive (AD) 2017-14- 14, which applied to all Airbus SAS Model A321-111, -112, -131, -211, - 212, -213, -231, and -232 airplanes. AD 2017-14-14 required repetitive inspections for cracking in the cabin floor beam junction at certain fuselage frame locations and repair if necessary. Since the FAA issued AD 2017-14-14, further analysis determined that the compliance times for the inspections must also be based on flight hours. This AD continues to require the actions in AD 2017-14-14, revises compliance times, and adds a provision for optional modifications. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus Aircraft Maintenance Updates
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318-111, -112, -121, and -122 airplanes; A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and - 171N airplanes; A320-211, -212, -214, -216, -231, -232, -233, -251N, - 252N, -253N, -271N, -272N, and -273N airplanes; and A321-111, -112, - 131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, - 251NX, -252NX, -253NX, -253NY, -271NX, and -272NX airplanes. This AD was prompted by a determination that new airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus Canada Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports that the interface pin of the secondary load path in the upper gimbal of the horizontal stabilizer trim actuator (HSTA) was incorrectly installed. This AD requires a detailed visual inspection of the interface pin of the HSTA to determine if the interface pin is incorrectly installed, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A330 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A330- 800, and A330-900 series airplanes. This AD was prompted by an incorrect shot peening application being implemented in production starting from 2008. This AD requires repetitive detailed inspections (DET) of certain splice fittings and, depending on findings, repair. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Rulemaking on Airworthiness for Airbus Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-12, which applies to certain Airbus Helicopters Model AS 332L2 and EC 225LP helicopters. AD 2020-06-12 requires determining the accumulated hours time-in-service (TIS) of certain part-numbered main gearbox (MGB) suspension bar attachment bolts (bolt) and certain part- numbered MGB suspension bar attachment fittings (fitting), applying a life limit add-on factor, and inspecting the torque of certain MGB suspension bar attachment nuts (nuts). Since the FAA issued AD 2020-06- 12, the manufacturer developed a design improvement, and the FAA determined modifying the helicopter is necessary. This proposed AD would retain the actions required by AD 2020-06-12 and would also require modification of the MGB suspension bar, inspection of the torque, and corrective actions. This proposed AD would also allow credit for the initial service life calculations if certain requirements are met and would prohibit installing a certain bolt after the modification is accomplished on any helicopter. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Airbus A321-271NY by FAA
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A321-271NY airplanes. This AD was prompted by the determination that affected parts addressed by other ADs could be installed in service on this airplane model. This AD requires corrective action if necessary and prohibits the installation of affected parts. The FAA is issuing this AD to address unsafe conditions on these products.
Learn More