✈️Proposed Airworthiness Directive by FAA for Airbus A350 Models
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by a determination that certain master minimum equipment list (MMEL) items do not comply with MMEL certification requirements. This proposed AD would require revising the operator's existing FAA- approved minimum equipment list (MEL), as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Airbus Canada Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report that the nose radome lightning diverter strips on certain aircraft were painted in production; paint on the diverter strips can compromise the nose radome lightning protection. This AD requires inspecting for paint on the diverter strips on the nose radome, and replacing the nose radome if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for MHI RJ Aviation Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701, and 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by a determination that new or more restrictive aircraft maintenance manual (AMM) tasks are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive AMM tasks, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus A330 Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes. This AD was prompted by a report of contamination of the advanced pneumatic detector pressure switch of engine pylon fire detectors. This AD requires require replacement of the affected parts and prohibits installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Bombardier BD-700-2A12 Aircraft
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the discovery that a partial loss of thrust after an engine failure during a required navigation performance authorization required (RNP- AR) approach under certain weight, altitude and temperature (WAT) conditions, may lead to a descent below the specified path guidance. This AD requires a revision to the existing airplane flight manual (AFM), to incorporate updated WAT tables for RNP-AR approach operations. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Boeing 737 Airworthiness Directive Requires Compliance Updates
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by two engine fan blade-out (FBO) events that resulted in the separation of engine inlet cowl and fan cowl parts from the airplane. In one event, fan cowl parts damaged the fuselage, which caused loss of pressurization and subsequent emergency descent. This AD requires replacing the fasteners on the fan cowl support beam hinge fittings for certain airplanes and, for all airplanes, requires modifying the radial restraint assembly and installing an external doubler at the starter vent, or as an option, installing a serviceable fan cowl. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for General Electric Aircraft Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model CT7-5A2, CT7-5A3, CT7-7A, CT7-7A1, CT7-9B, CT7-9B1, CT7-9B2, CT7-9C, CT7-9C3, CT7-9D, and CT7-9D2 engines. This AD was prompted by the manufacturer's determination that certain GE Model CT7 fleets have affected cooling plates installed that do not meet lifing guidelines. This AD requires replacement of the stage 1 turbine forward cooling plate and the stage 2 turbine aft cooling plate. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Pratt & Whitney Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney (PW) Model PW1519G, PW1521G, PW1521GA, PW1521G- 3, PW1524G, PW1524G-3, PW1525G, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A engines with a certain high-pressure compressor (HPC) 7th-stage axial rotor installed. This AD was prompted by an analysis of an event involving an International Aero Engines, LLC (IAE LLC) Model PW1127GA-JM engine, which experienced an HPC 7th-stage integrally bladed rotor (IBR-7) separation that resulted in an aborted takeoff. This AD requires performing initial and repetitive angled ultrasonic inspections (AUSI) of certain HPC 7th-stage axial rotors for cracks and replacing the HPC 7th-stage axial rotors if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Boeing 737 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by two engine fan blade-out (FBO) events that resulted in the separation of engine inlet cowl and fan cowl parts from the airplane. In one event, fan cowl parts damaged the fuselage, which caused loss of pressurization and subsequent emergency descent. This AD requires replacing specified inlet cowl aft bulkhead fasteners for certain airplanes; for certain other airplanes, inspecting the inlet cowl aft bulkhead fastener and replacing the fasteners if rivets are found, and, for all airplanes, replacement of the crushable spacers used in the attachment of the inlet cowl to the engine fan case; or as an option, installing a serviceable inlet cowl. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations (AWLs). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directives for CFM Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) Model LEAP-1A, LEAP-1B, and LEAP- 1C engines. This AD was prompted by a manufacturer investigation that revealed a quality escape for low-pressure turbine (LPT) disks made from forgings with nonconforming grain size. This AD requires removal and replacement of the LPT stage 4 and stage 5 disks. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More