✈️New Airworthiness Directives for Airbus A350
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive for General Electric Engines - FAA Regulation
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) Model CF34-10E2A1, CF34-10E5, CF34- 10E5A1, CF34-10E6, CF34-10E6A1, CF34-10E7, and CF34-10E7-B engines with certain part-numbered high-pressure turbine (HPT) shroud/low pressure turbine (LPT) nozzle assemblies installed. This AD was prompted by a report of failed retention features of the inner and outer support air ducts (commonly referred to as spoolies) discovered during engine disassembly. This AD requires a visual inspection of the combustion case for wear and gouges, repair if necessary, and rework of the affected HPT shroud/LPT nozzle assemblies to add a positive retention of the support air duct. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2015-02- 14, which applied to all Airbus SAS Model A318 series airplanes; A319- 111, -112, -113, -114, -115, -131, -132, and -133 airplanes; A320-211, -212, -214, -231, -232, and -233 airplanes; and A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. AD 2015-02-14 required repetitive inspections for cracking, damage, correct installation, and correct adjustment of the main landing gear (MLG) door hinge and actuator fittings on the keel beam, corrective actions if necessary, and revision of the existing maintenance or inspection program, as applicable. Since the FAA issued AD 2015-02-14, a new design of the MLG door keel beam hinge and actuator fitting was developed. This AD continues to require the actions specified in AD 2015-02-14, adds an optional terminating action, and revises the applicability, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Canada Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by reports that the interface pin of the secondary load path in the upper gimbal of the horizontal stabilizer trim actuator (HSTA) was incorrectly installed. This proposed AD would require a detailed visual inspection of the interface pin of the HSTA to determine if the interface pin is incorrectly installed, and applicable on-condition actions as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Airbus A350 Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and A350-1041 airplanes. This proposed AD was prompted by reports of mechanical noises originating from the nose landing gear (NLG) shock absorber during ground maneuvers. This proposed AD would require repetitive inspections (i.e., steering checks) of the NLG shock absorber and applicable on-condition actions and limit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive on General Electric Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model CF6-80E1A2, CF6-80E1A3, CF6-80E1A4, and CF6-80E1A4/B engines. This AD was prompted by a manufacturer investigation that revealed certain high-pressure turbine (HPT) stage 1 and HPT stage 2 disks were manufactured from powder metal material suspected to contain iron inclusion. This AD requires replacement of affected HPT stage 1 and HPT stage 2 disks with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Bombardier Airplanes Overview
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 airplanes. This proposed AD was prompted by a report indicating that the clearance between therapeutic flexible oxygen hoses and electrical harnesses may be non-compliant to design requirements, and that positive separation mechanisms and appropriate protective barriers may not have been installed in accordance with the applicable installation standards. This proposed AD would require a detailed inspection of the therapeutic flexible oxygen hose for damage and protection, and the electrical harnesses for damage; a detailed inspection for the clearance between the therapeutic oxygen rigid tube to oxygen hose elbow fitting (also referred to as elbow fitting), if applicable, and the nearest electrical harness, and between the therapeutic flexible oxygen hose and electrical harness; and applicable related investigative and corrective actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Airplanes Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-112 and -132 airplanes, and Model A320-214, -232, -233, -251N, and -271N airplanes. This proposed AD was prompted by rivet holes being left unplugged after bracket relocation or removal accomplished during certain modifications, potentially resulting in fatigue damage starting from those rivet holes. This proposed AD would require a one-time special detailed inspection (SDI) of the rivet holes and applicable corrective actions; and would also allow the installation of certain modifications, provided rivets are installed after the modification; as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-18, which applies to all Airbus SAS Model A318 series airplanes; A319 series airplanes; A320-211, -212, -214, -216, -231, - 232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes; and A321 series airplanes. AD 2020-06-18 requires replacement of affected trimmable horizontal stabilizer actuators (THSAs) with serviceable THSAs. Since the FAA issued AD 2020-06-18, a new Airbus airplane model (A321-253NY) has been certified, on which affected parts could be installed in service. This proposed AD would continue to require the actions in AD 2020-06-18, would revise the applicability to include Model A321-253NY airplanes, and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Gulfstream Aerospace Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation Model GVI airplanes. This proposed AD was prompted by a determination that new and more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new and more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More