✈️New Airworthiness Directive for Boeing 757 Aircraft Inspections
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a report indicating an operator has found cracks on three Model 757-200PF airplanes at the main deck cargo door cutout forward and aft hinge attachment holes. This AD requires a maintenance record check for repairs at the forward and aft hinge areas of the main deck cargo door cutout; repetitive open-hole high frequency eddy current (HFEC) inspections for cracks in the unrepaired areas of the bear strap, skin, doubler, and upper sill chord at the main deck cargo door forward and aft hinge attachment holes; and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 737 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Bombardier Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by uncommanded horizontal stabilizer motion during several in- service events caused by a problem with the trim switch wiring. This AD requires installing the pitch/roll trim switch relays. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Embraer Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-12-12, which applies to all Embraer S.A. Model ERJ 170 airplanes and Model ERJ 190-100 STD, -100 LR, -100 ECJ, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. AD 2020-12-12 requires repetitive detailed inspections for cracking of the engine inboard and outboard engine pylon lower link lugs, and repair if necessary. Since the FAA issued AD 2020-12-12, it was determined that certain compliance times must be reduced. This proposed AD would continue to require the actions in AD 2020-12-12, with revised compliance times, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes New Airworthiness Directive for Leonardo Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Leonardo S.p.a. Model A119 and AW119 MKII helicopters. This proposed AD was prompted by a report of an electrical failure of the starter-generator, due to a rupture of the drive shaft, which resulted in a partial loss of battery power. This proposed AD would require installing a battery discharge detector and revising the existing Rotorcraft Flight Manual (RFM) for the helicopter, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Airworthiness Directive for Leonardo Helicopters by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model A109E, A109S, and AW109SP helicopters. This proposed AD was prompted by reports of incorrect installation of the motor (MTR) cables and the bonding braids connected to the engine fire extinguisher bottles. This proposed AD would require inspecting the cables and bonding braids installation and, depending on the results, accomplishing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-16- 06, which applied to certain Airbus SAS Model A330-200, A330-200 Freighter, A330-300, and A330-900 series airplanes; and all Model A340- 200 and A340-300 series airplanes. AD 2022-16-06 required modifying the trimmable horizontal stabilizer actuator (THSA) installation, implementing the electrical load sensing device (ELSD) wiring provisions, and installing and activating the ELSD. This AD was prompted by tests that demonstrated that when the upper secondary load path (SLP) of the THSA is engaged, the THSA might not stall, with consequently no indication of SLP engagement, and by the recent determination that the required actions of AD 2022-16-06 cannot be accomplished on certain airplanes. This AD continues to require the actions in AD 2022-16-06 with revised procedures, and also requires additional actions for certain airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Embraer Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-135ER, -135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145EP, -145ER, -145LR, -145MP, -145MR, and -145XR airplanes. This AD was prompted by a structural assessment that indicated certain central fuselage longitudinal splices are subjected to fatigue damage on multiple sites due to loose fasteners, which may reduce the structural residual strength below the required levels. This AD requires performing repetitive inspections of certain upper central fuselage longitudinal splices and reporting the inspection results, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. This AD also requires performing corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🛩️New FAA Airworthiness Directive for Britten-Norman Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Britten-Norman Aerospace Ltd. Model BN-2, BN-2A, BN-2A-2, BN- 2A-3, BN-2A-6, BN-2A-8, BN-2A-9, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A- 27, BN-2B-20, BN-2B-21, BN-2B-26, BN-2B-27, BN-2T, BN2T-4R, and BN2T-4S airplanes; and certain Model BN2A MK. III, BN2A MK. III-2, and BN2A MK. III-3 airplanes. This AD was prompted by the determination that, in order to ensure the continued structural integrity of certain landing gear and associated components, it is necessary to require removal of these components from service prior to exceeding established fatigue lives. This AD requires determining the number of landings on affected main landing gears (MLGs), nose landing gears (NLGs), and associated components; removing from service any part that has reached or exceeded the established fatigue life and installing a replacement part; and prohibiting the installation of any affected part unless the number of landings for that part is below the established fatigue life. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Withdraws Proposed Rule on Boeing Airworthiness Directives
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to supersede Airworthiness Directive (AD) 2023-08-04, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. The NPRM was prompted by reports of a loss of water pressure during flight and water leaks that affected multiple pieces of electronic equipment, and by the discovery that some clamshell couplings did not have the required safety strap. The NPRM would have required inspecting all door 1 and door 3 lavatory and galley potable water systems for missing or incorrectly installed clamshell couplings, inspecting all clamshell couplings for the presence and correct installation of safety straps at door 1 and door 3 lavatories and galleys with a potable water system, and performing applicable on- condition actions. The NPRM would have also prohibited the installation of affected parts at inspection locations and removed Model 787-10 airplanes from the applicability. Since issuance of the NPRM, the FAA has determined that the identified service information may not adequately address the unsafe condition on one of the galleys, and Model 787-10 airplanes should be included in the applicability. Accordingly, the NPRM is withdrawn.
Learn More