⚒️Sunshine Act Meeting Notice by Federal Mine Safety Commission
The Federal Mine Safety and Health Review Commission will hold an open session meeting to discuss a case involving Nally & Hamilton Enterprises, focusing on safety reporting obligations regarding mine hazards. The meeting, scheduled for March 11, 2025, will address specific regulatory compliance issues within the mining industry.
Learn More✈️Airworthiness Directive for ATR Airplanes Requiring Probe Replacement
The FAA is adopting a new airworthiness directive (AD) for all ATR--GIE Avions de Transport R[eacute]gional Model ATR42 and Model ATR72 airplanes. This AD was prompted by the insufficient accuracy of a certain Angle of Attack (AoA) probe at low airspeeds which could lead to a delayed activation of the stick pusher in a flaps-extended configuration. This AD requires replacing each affected part with a serviceable part, and also prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive for ATR72 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all ATR--GIE Avions de Transport R[eacute]gional Model ATR72 airplanes. This AD was prompted by reports of the main landing gear (MLG) rear hinge pin being ruptured. This AD requires replacing affected parts and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Airbus A330 Maintenance
The FAA is superseding Airworthiness Directive (AD) 2023-11- 08, which applied to all Airbus SAS Model A330-841 and -941 airplanes. AD 2023-11-08 required maintenance actions, including a high-pressure valve (HPV) seal integrity test, repetitive replacement of the HPV clips, revision of the existing airplane flight manual (AFM), and implementation of updates to the FAA-approved operator's minimum equipment list (MEL). This AD was prompted by the determination that the replacement intervals required by AD 2023-11-08 must be reduced to address the unsafe condition. This AD continues to require the actions in AD 2023-11-08. This AD also reduces the HPV clip replacement intervals, requires an additional revision of the existing AFM for certain airplanes, and limits the installation of HPV clips, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More⚠️OSHA Extends Information Collection for Lead in Construction Standard
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Lead in Construction Standard.
Learn More✈️Proposed Airworthiness Directives for Airbus A321 Models
The FAA proposes to supersede Airworthiness Directive (AD) 2017-14-14, which applies to all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2017-14-14 requires repetitive inspections for cracking in the cabin floor beam junction at certain fuselage frame locations, and repair if necessary. Since the FAA issued AD 2017-14-14, further analysis determined that the compliance times for the inspections must also be based on flight hours. This proposed AD would continue to require the actions in AD 2017-14-14, and would require revised compliance times and add a provision for optional modifications, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Airworthiness Directive for Airbus Helicopters MBB-BK 117
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 C-2 and MBB-BK 117 D-2 helicopters. This proposed AD was prompted by reports of significant wear of the control rod assembly and pitch link assembly spherical bearings. This proposed AD would require measuring the radial play of certain control rod assembly and pitch link assembly spherical bearings, reporting the results, and depending on the results, taking corrective action. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. This proposed AD would also prohibit installing certain control rod assemblies and pitch link assemblies unless certain requirements are met. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Boeing 787 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by reports that very high frequency (VHF) radio frequencies transfer between the active and standby windows of the tuning control panel (TCP) without flightcrew input. The uncommanded frequency changes could result in missed communications between the flightcrew and Air Traffic Control. This proposed AD would require updating the TCP operational software (OPS) and performing a software configuration check. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Rolls-Royce Engines
The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Model Trent 1000-AE3, Trent 1000- CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, Trent 1000-R3, Trent 7000-72, and Trent 7000-72C engines. This AD was prompted by reports of cracked intermediate pressure compressor (IPC) shaft assembly front air seals. This AD requires an inspection of the affected IPC shaft assembly for cracking and, depending on the results of the inspection, repetitive inspections or replacement of the IPC shaft assembly front air seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Austro Engine GmbH Engines
The FAA is superseding Airworthiness Directive (AD) 2023-20-03 for certain Austro Engine GmbH Model E4 and E4P engines. AD 2023-20-03 required repetitive engine oil analysis for aluminum content outside the acceptable limits and, if necessary, replacement of the pistons, piston rings, con-rods assembly, and crankcase or, as an alternative, replacement of the engine core. Since the FAA issued AD 2023-20-03, the manufacturer identified errors in the lists of affected engines and provided updated information, which prompted this AD. This AD retains the requirements of AD 2023-20-03, adds compliance times for additional affected engine serial numbers, and removes certain engine serial numbers from the applicability of the existing AD. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More