✈️New Airworthiness Directive for Airbus SAS Airplanes by FAA
The FAA is superseding Airworthiness Directive (AD) 2022-11- 01, which applied to certain Airbus SAS Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2022-11-01 required a detailed inspection (DET) of the main landing gear (MLG) support rib 5 lower flange, a fluorescent penetrant inspection (FPI) around the spot facing of certain fastener holes if necessary, and applicable corrective actions. This AD was prompted by the determination that additional airplanes are affected by the unsafe condition. This AD continues to require the actions in AD 2022-11-01 and adds airplanes to the applicability, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Boeing Airworthiness Directive
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report of operators receiving No. 1 flight compartment windows that may not meet type design requirements for withstanding a bird impact. This AD requires replacing affected No. 1 flight compartment windows and prohibits the installation of affected windows. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Leonardo Helicopters by FAA
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109E, A109K2, A109S, AB412, AB412 EP, AB139, and AW139 helicopters. This AD was prompted by a report that certain rescue hoist cable assemblies may be equipped with a defective ball end. This AD requires inspecting certain rescue hoist cable assemblies and, depending on the results, replacing the rescue hoist cable assembly. This AD also allows installing certain rescue hoist cable assemblies and certain rescue hoists provided its requirements are met. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Final Rule on Standard Instrument Approach Procedures
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More✈️FAA Airworthiness Directive for Airbus A330 Effective March 2025
The FAA is superseding Airworthiness Directive (AD) 2022-19- 02, which applied to certain Airbus SAS Model A330-200, -200 Freighter, and -300 series airplanes; and Model A330-841 and A330-941 airplanes. AD 2022-19-02 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD-2022-19-02, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directives Impacting Airbus Operators and Costs
The FAA is superseding Airworthiness Directive (AD) 2023-09- 01, which applied to all Airbus SAS Model A318 series airplanes; Model A319 series airplanes; Model A320-211, -212, -214, -216, -231, -232, - 233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes; and Model A321 series airplanes. AD 2023-09-01 was prompted by a report that certain overheat detection system (OHDS) sensing elements installed at certain positions might not properly detect thermal bleed leak events due to a quality escape during the manufacturing process. AD 2023-09-01 required a one-time detailed inspection of each affected part installed at an affected position and replacement if necessary and prohibited the installation of affected parts at affected positions. Since the FAA issued AD 2023-09-01, a new airplane model (A321-253NY) has been certified by EASA, on which affected parts could be installed in service. This AD continues to require the actions in AD 2023-09-01, and revises the applicability to include Model A321-253NY airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed AD for Boeing 757
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -300 series airplanes. This proposed AD was prompted by a report of cracking found in new locations at a certain body station (STA) during frame segment replacement repairs, including in the web at the K-hole between certain stringers, in the outer chord above the lower hinge intercostal, and in the inner chord and web between certain stringers. This proposed AD would require an inspection or records check for the presence of approved or local repairs, repetitive eddy current inspections for cracking, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Embraer Aircraft by FAA
The FAA proposes to supersede Airworthiness Directive (AD) 2006-20-08, which applies to all Embraer S.A. Model EMB-145, -145ER, - 145MR, -145LR, -145XR, -145MP, and -145EP airplanes. AD 2006-20-08 requires repetitive inspections to detect cracking or failure of the rod ends and fittings of the aileron power control actuator (PCA) and corrective actions if necessary, and provides an optional terminating action. Since the FAA issued AD 2006-20-08, it has been determined that there was an error in identifying a maintenance task number. This proposed AD would continue to require the actions in AD 2006-20-08 and corrects an error in a task number, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Airworthiness Directive for Airbus Helicopters Effective March 2025
The FAA is adopting a new airworthiness directive (AD) certain Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, AS355E, AS355F, AS355F1, AS355F2, AS355N, AS355NP, AS-365N2, AS 365 N3, EC 155B, EC155B1, EC225LP, SA-365N, and SA-365N1 helicopters. This AD was prompted by a report of an unintentional activation of the hoist shear-button (shear-button) on the collective pitch handle during a night flight. This AD requires checking the operation of the shear- button safety-cap on each applicable collective pitch handle and prohibits installing certain part-numbered collective pitch handles or collective sticks with those part-numbered collective pitch handles installed unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Aircraft Buckle Compliance
The FAA is superseding Airworthiness Directive (AD) 2021-07-13 for certain Pacific Scientific Company rotary buckle assemblies (buckles). AD 2021-07-13 required inspecting each specified buckle including its buckle handle vane and prohibited installing affected buckles. This AD was prompted by the publication of an updated service bulletin, which revises the applicability based on date of manufacture of the affected buckles. This AD retains certain requirements of AD 2021-07-13, reduces the applicability, and requires performing corrective actions by complying with certain portions of the updated service bulletin. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More