✈️FAA Airworthiness Directive for Viking Air Airplanes Compliance
The FAA is superseding Airworthiness Directive (AD) 2022-23- 08, which applied to all Viking Air Limited (Viking) Model DHC-3 airplanes. AD 2022-23-08 required a visual inspection of the stabilizer actuator to confirm that the stabilizer actuator lock ring is present, correctly seated in the groove in the upper housing, and engaged in the clamp nut, applicable corrective actions, application of a torque seal, and sending the inspection results to the FAA. Since the FAA issued AD 2022-23-08, Transport Canada, which is the aviation authority for Canada, issued mandatory continuing airworthiness information (MCAI) to address the unsafe condition identified as a missing stabilizer actuator lock ring. This AD requires repetitively inspecting the stabilizer actuator to confirm that the stabilizer actuator lock ring is present, correctly seated in the groove in the upper housing, and engaged in the clamp nut; taking applicable corrective actions; applying a witness mark (torque seal); and installing a secondary retention feature as terminating action for the repetitive inspections. This AD also prohibits installing any stabilizer actuator unless it is a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A330 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A330- 800, and A330-900 series airplanes. This AD was prompted by an incorrect shot peening application being implemented in production starting from 2008. This AD requires repetitive detailed inspections (DET) of certain splice fittings and, depending on findings, repair. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New FAA Airworthiness Directive for Leonardo Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.A. Model A109A, A109A II, A109C, A109K2, and A119 helicopters and certain AW119 MKII helicopters. This AD was prompted by a report of incorrect installation of the bolts that attach the pitch (longitudinal) actuator assembly and the roll (lateral) actuator assembly to their respective bellcrank assemblies of the cyclic control system. This AD requires inspecting the bolts for proper installation and, depending on the results, performing corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Diamond Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for all Diamond Aircraft Industries GmbH (DAI) Model DA 42, DA 42 NG, and DA 42 M-NG airplanes. This proposed AD was prompted by several reports of passenger door separation from the fuselage. This proposed AD would require revising the existing airplane flight manual (AFM) for your airplane to provide the flight crew with revised operating limitations, emergency procedures, and normal operating procedures; modifying the airplane; and repetitively inspecting the door latching and safety hooks for correct engagement, foreign objects, damage (including but not limited to corrosion and wear that exceeds specified limits), and proper function. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁New FAA Airworthiness Directive for Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332L, AS 332L1, AS 332L2, and EC 225LP helicopters. This AD was prompted by a report of a corroded emergency sea anchor pin. This AD requires inspecting the emergency sea anchor and, depending on the result, replacing the emergency sea anchor. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive Correction for Airbus SAS Airplanes
The FAA is correcting an airworthiness directive (AD) that was published in the Federal Register. That AD applies to all Airbus SAS Model A319-151N, -153N, -171N, and -173N airplanes; Model A320-251N, - 252N, -253N, -271N, -272N, and -273N airplanes; and Model A321-251N, - 252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, -272NX, - 253NY, and -271NY airplanes. As published, a reference to a European Union Aviation Safety Agency (EASA) AD specified in the regulatory text is incorrect. This document corrects that error. In all other respects, the original document remains the same.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Impacting Operators
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC120B, EC 130 B4, and EC 130 T2 helicopters. This AD was prompted by a report of a missing retaining ring between the supply hose and the central supply coupling of an emergency flotation system (EFS) inflation assembly. This AD requires inspecting for the presence of the retaining ring in an EFS with certain inflation assemblies installed and, depending on the results, taking corrective action. This AD also prohibits installing an EFS with those inflation assemblies installed. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🛠️OSHA Proposes NRTL Recognition Expansion for DEKRA Certification Inc.
In this notice, OSHA announces the application of DEKRA Certification Inc., for expansion of the recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the application. Additionally, OSHA proposes to add two test standards to the NRTL Program's List of Appropriate Test Standards.
Learn More✈️Proposed Airworthiness Directive for Gulfstream Aircraft – FAA NPRM
The FAA proposes to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace LP Model Gulfstream 100, Astra SPX, and 1125 Westwind Astra airplanes. This proposed AD was prompted by a determination that new airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁Proposed Airworthiness Directive for Airbus Helicopters by FAA
The FAA proposes to supersede Airworthiness Directive (AD) 2021-20-16, which applies to all Airbus Helicopters Model AS355E, AS 355-F, AS 355-F1, AS355F2, AS355N, and AS355NP helicopters and certain Model AS 350B3 helicopters. AD 2021-20-16 requires repetitive cleaning and visual and detailed inspections of the right-hand side of the vertical fin spar and vertical fin upper attachments for discrepancies (cracking) with corrective action, if necessary. Since the FAA issued AD 2021-20-16, Airbus Helicopters developed a modification of the upper fin assembly. This proposed AD would require the same actions as AD 2021-20-16 and would also require replacement of the upper fin assembly with a modified upper fin assembly, which would constitute terminating action for the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More