⚒️MSHA Proposes Removal of Outdated Trolley Safety Regulations
MSHA is proposing to remove and revise provisions for metal and nonmental (MNM) mines and coal mines regarding the use of trolleys for transportation of mined ore, coal, material, and personnel. Trolleys are an outdated technology that have been replaced by more efficient belt conveyor haulage systems for transporting mined ore and coal. Diesel and battery-operated mobile equipment are now used to transport personnel and equipment. Trolleys are no longer used in MNM or coal mines and there is no anticipated future use of this legacy equipment in MNM and coal mines.
Learn More⚒️Proposed Deregulation for Blacksmith Shops in Mining Operations
MSHA is proposing to revise 30 CFR part 57 to remove outdated requirements regarding blacksmith shops located at surface metal and nonmetal mines. Removal of this standard would not result in a reduction of safety protection for miners at surface metal and nonmetal mines.
Learn More🛠️New Rule Facilitates Non-Permissible PAPR Usage in Mining
MSHA is proposing to allow the use of non-permissible Powered Air Purifying Respirators (PAPRs) in specified underground areas of mines, if the equipment meets certain technical specifications and is operated under specific conditions. This proposed rule would codify technical specifications and working conditions to allow the use of non-permissible PAPRs in underground gassy mines. This proposed rule would reduce burden because mine operators would no longer need to submit a petition for modification to use non-permissible PAPRs.
Learn More⛏️MSHA Proposes Revision of Diesel Particulate Matter Regulations
MSHA is proposing to revise 30 CFR part 57 by removing outdated requirements for miners' exposures to diesel particulate matter (DPM) in underground metal and nonmetal mines (MNM). These revisions would streamline the requirements for DPM for underground MNM mine operators while maintaining the same level of protection for miners.
Learn More💉FDA Classifies X-Ray Attenuation Cream Under Class II Devices
The Food and Drug Administration (FDA, the Agency, or we) is classifying the cream for x-ray attenuation into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the cream for x-ray attenuation's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.
Learn More💻FDA Final Order on Radiological Computer-Assisted Detection Devices
The Food and Drug Administration (FDA, the Agency, or we) is classifying the radiological computer-assisted detection and diagnosis software into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the radiological computer-assisted detection and diagnosis software's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.
Learn More🩻FDA Classifies Radiological Devices to Enhance Market Access
The Food and Drug Administration (FDA, the Agency, or we) is classifying the radiological acquisition and/or optimization guidance system into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the radiological acquisition and/or optimization guidance system's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices in part by reducing regulatory burdens.
Learn More⚛️Amendment 15 to Approved Spent Fuel Storage Casks Regulations
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the NAC International, Inc. MAGNASTOR[supreg] Storage System listing within the "List of approved spent fuel storage casks" to include Amendment No. 15 to Certificate of Compliance No. 1031. Amendment No. 15 revises the certificate of compliance to add a new variation of the Lightweight MAGNASTOR[supreg] Transfer Cask design, add a new concrete cask design, increase the maximum system head load capacity, add new loading patterns, add a thermal shunt for short loading patterns, remove the 5 percent burnup penalty, increase Passive MAGNASTOR[supreg] Transfer Cask heat load, add two new pressurized-water reactor fuel types to support future operations, modify the transportable storage canister lid to allow additional clearance near the top center of the basket, and correct and clarify principal design criteria, operating procedures, and the acceptance criteria and maintenance program. This amendment also makes corresponding revisions to previously approved drawings for the concrete cask, Technical Specifications Appendix A and Appendix B, specific chapters of the final safety analysis report, and several license drawings.
Learn More⚛️NRC Updates Spent Fuel Storage Regulations for HI-STORM 100 Cask System
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the Holtec International HI- STORM 100 Cask System listing within the "List of approved spent fuel storage casks" to include Renewed Amendment No. 19 to Certificate of Compliance No. 1014. Renewed Amendment No. 19 revises the certificate of compliance to update the acceptance criteria and method of evaluation (MOE) for the HI-STORM 100 system tipover accident for equipment combinations involving multi-purpose canisters (MPCs) with Metamic-HT baskets. This involves applying a new stress-based criteria and completing new evaluations consistent with the new tipover acceptance criteria and MOE and involves some adjustments of the existing deflection criteria.
Learn More⚛️NRC Amendments to NAC-MPC System Impacting Spent Fuel Storage
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the NAC Multi-Purpose Canister (NAC-MPC) System listing within the "List of approved spent fuel storage casks" to include Amendment No. 9 and revise Amendment Nos. 6, 7, and 8 to Certificate of Compliance (CoC) No. 1025. The addition of Amendment No. 9 and the revisions to Amendment Nos. 6, 7, and 8 amend the description of the vertical concrete cask (VCC) in the CoC and technical specifications to make a distinction between the VCC body and the VCC lid, in terms of applicability of the American Concrete Institute (ACI) Specifications ACI 349 and ACI 318.
Learn More