✈️FAA Issues Airworthiness Directive for Gulfstream Aircraft Compliance
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation Model GVII-G500 and GVII-G600 airplanes. This AD was prompted by a report of cracking in the electrical grounding receptacles located on the left and right wings. This AD requires inspecting the electrical grounding receptacles for cracks and corrosion, performing applicable on-condition actions, and sealing over the grounding receptacles on the top of the wings to permanently disable the receptacle. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Regulations on Instrument Approach Procedures Effective 2025
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More✈️Airworthiness Directive for CFM LEAP-1B Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) Model LEAP-1B engines. This AD was prompted by a report of a quality escape involving certain high- pressure compressor (HPC) stage 2 seals manufactured without detailed finish machining, which could result in deeper rubs and mechanical damage to the seal teeth of the stage 3-4 compressor rotor blisk (stage 3-4 blisk) of the mating compressor rotor during initial operation. This AD requires a visual inspection of the HPC stage 2 seal, a visual inspection of the forward arm seal teeth of the stage 3-4 blisk, an eddy current inspection (ECI) of the forward arm seal teeth of the stage 3-4 blisk, and replacement of the HPC stage 2 seal and the stage 3-4 blisk, if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Regulatory Compliance Costs for Boeing 767 Airworthiness Directive
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 767-200, -300, and -300F airplanes. This AD was prompted by a report of a main landing gear (MLG) collapse event following maintenance where a grinder was operating outside of its input parameters, resulting in possible heat damage to the outer cylinder of the MLG. This AD requires replacing affected outer cylinders. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Final Rule on Instrument Approach Procedures Effective January 2025
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Learn More✈️New Airworthiness Directive for Airbus CN-235
The FAA is adopting a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-200, and CN-235-300 airplanes. This AD was prompted by a torn bulkhead seal found jamming the nose landing gear (NLG) emergency cable pulley. Due to the similarity of design, the main landing gear (MLG) emergency cable pulley could be exposed to the same failure mode. This AD requires repetitive inspections and corrective actions for damage of affected bulkhead seals and retainer rings, and repetitive replacement of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🛩️Proposed Class E Airspace Regulations at Blanding Municipal Airport
This action proposes to establish Class E airspace extending upward from 700 feet above the surface and revoke Class E airspace extending from 1,200 feet above the surface at Blanding Municipal Airport, Blanding, UT. Additionally, this action proposes administrative amendments to update the airport's legal description. These actions would support the airport's current instrument flight rules (IFR) operations that lack containment.
Learn More✈️Amendment of Class E Airspace for Smith Center, KS - 2024
This action amends the Class E airspace at Smith Center, KS. This action is the result of an airspace review conducted due to the decommissioning of the Mankato very high frequency omnidirectional range (VOR) as part of the VOR Minimum Operational Network (MON) Program. This action also updates the geographic coordinates of the airport to coincide with the FAA's aeronautical database. This action brings the airspace into compliance with FAA orders and supports instrument flight rule (IFR) procedures and operations.
Learn More✈️Amendment of Class E Airspace at Gaylord, MI by FAA
This action amends the Class E airspace at Gaylord, MI. This action is the result of an airspace review conducted due to the decommissioning of the Gaylord very high frequency omnidirectional range (VOR) as part of the VOR Minimum Operational Network (MON) Program. This action brings the airspace into compliance with FAA orders and supports instrument flight rule (IFR) procedures and operations.
Learn More✈️Class E Airspace Amendment for El Dorado, AR by FAA
This action amends the Class E airspace at El Dorado, AR. This action is the result of an airspace review conducted due to the development of new instrument procedures. The geographic coordinates and name of the airport and the name of the El Dorado VOR/DME are also being updated to coincide with the FAA's aeronautical database. This action brings the airspace into compliance with FAA orders and support instrument flight rule (IFR) procedures and operations.
Learn More