✈️FAA Issues Special Conditions for Canard Aerospace’s DHC-8-400
These special conditions are issued for a supplemental type certificate (STC) to install a digital systems architecture on the DeHavilland Model DHC-8-400 series airplane. This airplane, as modified by the Canard Aerospace Corporation (Canard), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is the installation of a digital systems architecture that will allow increased connectivity to and access from external network sources (e.g., operator networks, wireless devices, internet connectivity, service provider satellite communications, electronic flight bags, etc.) to the airplane's previously isolated electronic assets (networks, systems, and databases). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Learn More✈️FAA Amends VOR Federal Airways in Eastern United States
This action amends domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-16, V-103, V-375, and V- 473 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Roanoke, VA (ROA), VOR/Distance Measuring Equipment (VOR/DME). This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Compliance Requirements
The FAA proposes to supersede Airworthiness Directive (AD) 2023-05-13, which applies to all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2023-05-13 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-05-13, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require the actions in AD 2023-05-13 and would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Class E Airspace Establishment in Wickenburg, AZ
This action proposes to establish Class E airspace at Wickenburg, AZ. The FAA is proposing this action to support new instrument procedures and to support instrument flight rule (IFR) operations.
Learn More✈️Proposed Rulemaking for Airbus EC225LP Airworthiness Directive
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC225LP helicopters. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Amends VOR Federal Airways and RNAV Routes Impacting Cincinnati
This action amends Very High Frequency Omnidirectional Range (VOR) Federal Airways V-5, V-47, V-97, V-128, V-275, and V-517, and United States (U.S.) Area Navigation (RNAV) Route T-315; and revokes VOR Federal Airway V-19. The FAA is taking this action due to the planned decommissioning of the VOR portion of the Cincinnati, KY (CVG), VOR/Tactical Air Navigation (VORTAC) navigational aid (NAVAID). The Cincinnati VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Learn More✈️FAA Announces Deadline for Winter 2025/2026 Flight Schedules
Under this notice, FAA announces the submission deadline of May 15, 2025, for Winter 2025/2026 flight schedules at Chicago O'Hare International Airport (ORD), John F. Kennedy International Airport (JFK), Los Angeles International Airport (LAX), Newark Liberty International Airport (EWR), and San Francisco International Airport (SFO).
Learn More✈️FAA Notice of Petition for Exemption by ATL Europe
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Learn More✈️New FAA Airworthiness Directive on Pratt & Whitney Canada Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1 engines. This AD was prompted by a manufacturer design review that indicated certain flange bolts securing the gas generator case and turbine support case are susceptible to cracking at their current low- cycle fatigue (LCF) life. This AD requires repetitive borescope inspections (BSI) of the gas generator case to turbine support case retaining bolts for evidence of bolt cracks, bolt fracture, missing bolts, or loose bolts and replacement, if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Rolls-Royce Engines
The FAA is superseding Airworthiness Directive (AD) 2022-24-06 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model BR700- 710A1-10, BR700-710A2-20, and BR700-710C4-11 engines. AD 2022-24-06 required initial and repetitive visual inspections of certain low- pressure compressor (LPC) rotor (fan) disks and replacement of any LPC rotor (fan) disk with cracks detected. AD 2022-24-06 also allows for modification of the engine in accordance with RRD service information as a terminating action to these inspections. Since the FAA issued AD 2022-24-06, the manufacturer published updated service information and revised the engine maintenance manual (EMM) to provide instructions for an improved ultrasonic inspection method, which prompted this AD. This AD requires initial and repetitive visual inspections of certain LPC rotor (fan) disks and replacement of any LPC rotor (fan) disk with cracks detected and would allow modification of the engine as a terminating action to the inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More