✈️FAA Airworthiness Directive for Saab AB Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-21- 05, which applied to certain Saab AB Model 340A (SAAB/SF340A) and SAAB 340B airplanes. AD 2017-21-05 required revising the existing maintenance or inspection program, as applicable, to incorporate airworthiness limitations, including new inspection tasks for the drag brace support fitting of the main landing gear (MLG) and tasks related to the corrosion prevention and control program (CPCP). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2017-21-05 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for ATR Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42 and ATR72 airplanes. This AD was prompted by a report that a flight deck emergency escape hatch was difficult to open due to the hose ends being connected to the hatch with incorrect parts and/or installed collars with a too- small diameter that would not permit the drain hose to slide inside. This AD requires inspection of the flight deck emergency escape hatch drain hose for discrepancies and applicable corrective actions, and prohibits accomplishment of maintenance actions using the instructions of certain maintenance tasks, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS A321 Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, - 271NX, and -272NX airplanes. This proposed AD was prompted by the identification of an erroneous value of the main landing gear (MLG) tire width in the aircraft data files used for aircraft performance computation. This proposed AD would require revising the existing airplane flight manual (AFM) to incorporate a complementary performance data file (CPDF) update as specified in a European Union Aviation Safety Agency (EASA), which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive on Buckle Assemblies for Airplanes
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to all airplanes with certain Pacific Scientific Company rotary buckle assemblies (buckles) installed. This action revises the NPRM by expanding the applicability and updating the referenced material. As an option to the actions proposed by this SNPRM, this SNPRM would allow removing the male side from the lap of the restraint system assembly and installing a placard stating that use of the seat is prohibited; use of that crewmember seat or passenger seat would then be prohibited until the actions proposed by this SNPRM are accomplished and the male side from the lap of the restraint system assembly is reinstalled. The NPRM was prompted by a report of a manufacturing defect in the screws used inside the buckle; this SNPRM is prompted by the discovery that additional screws are affected by the unsafe condition. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over that in the NPRM, the FAA is requesting comments on this SNPRM.
Learn More✈️FAA Issues Airworthiness Directive for Airbus Aircraft Compliance
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes; Model A330-200, -200 Freighter, -300, -800, and -900 series airplanes; and Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by reports of trimmable horizontal stabilizer actuators (THSAs) being delivered to operators having erroneous information (accumulated life) in the authorized release certificate. This AD requires contacting Collins Aerospace for amended authorized release certificates for the affected parts and replacing the affected parts if necessary, and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer EMB-120 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-120, -120ER, -120FC, -120QC, and -120RT airplanes. This AD was prompted by a structural assessment, which found that the fuselage longitudinal skin splice and panel between certain frames are susceptible to cracking. This AD requires performing repetitive inspections of the fuselage center I longitudinal skin splice and applicable corrective actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Bombardier Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by uncommanded horizontal stabilizer motion during several in- service events caused by a problem with the trim switch wiring. This AD requires installing the pitch/roll trim switch relays. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing 737 Airplanes by FAA
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report indicating cracks in the frame inner chord and web at station (STA) 727. This AD requires an inspection for any repair installed, repetitive inspections of the frame inner chord and web at STA 727 for any crack, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Amendment and Revocation of Domestic VOR Airways by FAA
This action amends domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-3, V-35, V-51, V-97, V- 157, V-159, V-225, V-437, V-492, V-521, and V-537 and revokes VOR Federal Airways V-295, V-529, and V-601 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Cypress, FL (CYY), VOR/Distance Measuring Equipment (VOR/DME); the La Belle, FL (LBV), VOR/Tactical Air Navigation (VORTAC); the Pahokee, FL (PHK), VOR/DME; and the Treasure, FL (TRV), VORTAC. This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Learn More✈️New Airworthiness Directive for Boeing 757 Aircraft Inspections
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a report indicating an operator has found cracks on three Model 757-200PF airplanes at the main deck cargo door cutout forward and aft hinge attachment holes. This AD requires a maintenance record check for repairs at the forward and aft hinge areas of the main deck cargo door cutout; repetitive open-hole high frequency eddy current (HFEC) inspections for cracks in the unrepaired areas of the bear strap, skin, doubler, and upper sill chord at the main deck cargo door forward and aft hinge attachment holes; and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More