✈️Airworthiness Directive for Rolls-Royce Engines
The FAA is superseding Airworthiness Directive (AD) 2024-06-06 for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent7000-72 and Trent7000-72C engines. AD 2024-06-06 required revising the airworthiness limitations section (ALS) of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts. Since the FAA issued AD 2024-06-06, the manufacturer has revised the engine time limits manual (TLM) to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, which prompted this AD. This AD requires revising the ALS of the existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A300 B4-2C, A300 B4-203, A300 B4-603, A300 B4-605R, A300 B4-622, A300 B4-622R, and A300 F4-605R airplanes. This proposed AD was prompted by reports of cracking of the main landing gear (MLG) support rib 5 lower flange on certain modified airplanes due to incorrect accomplishment of modification instructions. This proposed AD would require a special detailed inspection (geometrical inspection) of the MLG rib 5 lower flange holes on the left-hand wing and right- hand wing and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives Impacting De Havilland Aircraft
The FAA is superseding Airworthiness Directive (AD) 2022-01- 02, which applied to certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes. AD 2022-01-02 required inspecting for corrosion of the nacelle to wing rear spar attachment pins, and the nacelle to landing gear attachment pins, and doing all applicable corrective actions. This AD was prompted by a determination that some operators were unable to identify the airplanes subject to each requirement. This AD continues to require the actions specified in AD 2022-01-02, clarifies the affected airplanes for each required action, and revises the applicability by removing Model DHC-8-400 airplanes; as specified in Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Changes to Class D and E Airspace in Warner Robins, GA
This action proposes amending Class D airspace and establishing Class E airspace extending upward from the surface above Robins AFB, Warner Robins, GA, as the air traffic control tower will shift to part-time operations. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Learn More✈️FAA Drug Testing Enforcement Discretion for Certificated Repair Stations
This notice announces that the FAA will not take enforcement action against regulated entities for failing to comply with the final rule titled "Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction" until March 20, 2025.
Learn More✈️FAA Delays Enforcement of Aircraft Registration Regulations
This notice announces that the FAA will not take enforcement action against regulated entities for failing to comply with the final rule titled "Aircraft Registration and Recordation Procedural Updates: Original Documents and Stamping" until March 20, 2025.
Learn More✈️Amendment of Class E Airspace in Austin, TX - 2025 Updates
This action corrects a typographical error in the final rule published in the Federal Register on February 24, 2025, amending the Class E airspace at Austin, TX, and establishing Class E airspace at Austin, Lago Vista, and Lakeway, TX.
Learn More✈️New Airworthiness Directive for Airbus Canada Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership (ACLP) Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a design review of aircraft structural and stress reports that resulted in a revision of operational loads for some aircraft flight phases. This AD requires using a certain version of the aircraft structural repair manual (ASRP) and a review and disposition of repairs based on previous versions, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Airbus A300-600 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus A350 Inspection Requirements
The FAA proposes to supersede Airworthiness Directive (AD) 2023-14-09, which applies to certain Airbus SAS Model A350-941 and - 1041 airplanes. AD 2023-14-09 requires an inspection for missing or incorrectly applied sealant in the wing tanks, applicable corrective actions, and a modification to restore two independent layers of lightning strike protection. Since the FAA issued AD 2023-14-09, Airbus provided inspection instructions for a new inspection area of the upper and lower, front and rear spar corner fittings for certain airplanes. This proposed AD would continue to require the actions in AD 2023-14-09 and would require a one-time detailed inspection (DET) for missing or incorrectly applied sealant of the front and rear spars for certain airplanes and applicable on-condition actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More