✈️Proposed Airworthiness Directive for Boeing 737-800 Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2013-08-15, which applies to certain The Boeing Company Model 737-800 series airplanes. AD 2013-08-15 requires repetitive inspections for cracking of the fuselage skin along chem-mill steps at certain crown skin and shear wrinkle areas and repair if necessary. Since the FAA issued AD 2013-08-15, the FAA has determined that the compliance times are not adequate. This proposed AD would continue to require the actions in AD 2013-08-15 but at reduced compliance times and would require post-modification inspections if an optional terminating action is accomplished. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-12- 12, which applied to all Embraer S.A. Model ERJ 170 airplanes and Model ERJ 190-100 STD, -100 LR, -100 ECJ, -100 IGW, -200 STD, -200 LR, and - 200 IGW airplanes. AD 2020-12-12 required repetitive detailed inspections for cracking of the engine inboard and outboard engine pylon lower link lugs, and repair if necessary. This AD continues to require the actions in AD 2020-12-12 with certain reduced compliance times. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for GE Aircraft Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model CF34-10E2A1, CF34-10E6, CF34-10E6A1, CF34-10E7, CF34-10E7-B, CF34-10E5, and CF34-10E5A1 engines. This AD was prompted by a report of cracks found in the high- pressure turbine (HPT) front rotating air seal. This AD requires performing repetitive fluorescent penetrant inspections (FPIs) to detect indications or linear indications (any indication which is four times longer than the width of that same indication) in the HPT front rotating air seal and, if necessary, replacing the HPT front rotating air seal or HPT rotor disk with parts eligible for installation as applicable. This AD also includes an optional terminating action to the repetitive FPIs. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🛩️FAA Notice on Formal Complaints Collection and Comments Request
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) approval for an information collection. The collection involves the filing of a complaint with the FAA alleging a violation of any requirement, rule, regulation, or order issued under certain statutes within the jurisdiction of the FAA. The FAA will use the information collected to determine if the alleged violation warrants investigation or action.
Learn More✈️Regulatory Amendment of Class E Airspace in Culpeper, VA
This action changes the referenced NAILR Non-Directional Beacon (NDB) in the airspace legal description to Point in Space Coordinates due to the decommissioning of the NAILR NDB. This action also updates the name and geographical coordinates for UVA Culpeper Medical Center Heliport. This action does not change the airspace boundaries or operating requirements.
Learn More✈️FAA Issues Airworthiness Directive for Airbus A350 Compliance
The FAA is superseding Airworthiness Directive (AD) 2022-27- 01, which applied to certain Airbus SAS Model A350-941 and -1041 airplanes. AD 2022-27-01 required replacing affected fasteners and applying additional head nut cap protection at the front and rear spars in the center wing box (CWB). Since the FAA issued AD 2022-27-01, the FAA determined that additional Airbus SAS Model A350 manufacturer serial numbers (MSNs) are affected by the same potential unsafe condition. This AD continues to require the actions in AD 2022-27-01 and expands the applicability to include the additional Airbus SAS Model A350 MSNs. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Boeing 737 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report of a frame web crack at a certain fuselage station (STA) between certain stringers common to the frame web notch. This AD requires repetitive inspections for cracks of the frames and repair of cracks. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes Land Use Change at Bemidji Regional Airport
The FAA is considering a proposal to change approximately 1.37 acres of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property located at Bemidji Regional Airport, Bemidji, Minnesota. The aforementioned land is not needed for aeronautical use. The subject parcel is located on the southeast side of the airport and is used for agricultural purposes. The airport sponsor proposes selling the property to the City of Bemidji for road right-of-way and a roadway/roundabout.
Learn More🛩️FAA Notice on Exemption Petition from Total Flight Solutions
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Learn More✈️FAA Notice on Petition for Exemption from Aviation Regulations
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Learn More