✈️Proposed Airworthiness Directive for Bombardier Airplanes Overview
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 airplanes. This proposed AD was prompted by a report indicating that the clearance between therapeutic flexible oxygen hoses and electrical harnesses may be non-compliant to design requirements, and that positive separation mechanisms and appropriate protective barriers may not have been installed in accordance with the applicable installation standards. This proposed AD would require a detailed inspection of the therapeutic flexible oxygen hose for damage and protection, and the electrical harnesses for damage; a detailed inspection for the clearance between the therapeutic oxygen rigid tube to oxygen hose elbow fitting (also referred to as elbow fitting), if applicable, and the nearest electrical harness, and between the therapeutic flexible oxygen hose and electrical harness; and applicable related investigative and corrective actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive on General Electric Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model CF6-80E1A2, CF6-80E1A3, CF6-80E1A4, and CF6-80E1A4/B engines. This AD was prompted by a manufacturer investigation that revealed certain high-pressure turbine (HPT) stage 1 and HPT stage 2 disks were manufactured from powder metal material suspected to contain iron inclusion. This AD requires replacement of affected HPT stage 1 and HPT stage 2 disks with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Gulfstream Aerospace Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation Model GVI airplanes. This proposed AD was prompted by a determination that new and more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new and more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus Airplanes Compliance
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-112 and -132 airplanes, and Model A320-214, -232, -233, -251N, and -271N airplanes. This proposed AD was prompted by rivet holes being left unplugged after bracket relocation or removal accomplished during certain modifications, potentially resulting in fatigue damage starting from those rivet holes. This proposed AD would require a one-time special detailed inspection (SDI) of the rivet holes and applicable corrective actions; and would also allow the installation of certain modifications, provided rivets are installed after the modification; as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-06-18, which applies to all Airbus SAS Model A318 series airplanes; A319 series airplanes; A320-211, -212, -214, -216, -231, - 232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes; and A321 series airplanes. AD 2020-06-18 requires replacement of affected trimmable horizontal stabilizer actuators (THSAs) with serviceable THSAs. Since the FAA issued AD 2020-06-18, a new Airbus airplane model (A321-253NY) has been certified, on which affected parts could be installed in service. This proposed AD would continue to require the actions in AD 2020-06-18, would revise the applicability to include Model A321-253NY airplanes, and would prohibit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Dassault Aviation Falcon 2000EX
The FAA proposes to adopt a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 2000EX airplanes. This proposed AD was prompted by reports of the incorrect installation of the very high frequency omnidirectional range and localizer (VOR/LOC) antenna coupler. This proposed AD would require implementing an operational limitation for Category (CAT) II and CAT III approaches, inspecting the VOR/LOC antenna coupler, and reinstalling the VOR/LOC antenna coupler if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Gulfstream G150 Airworthiness Directive and Compliance Requirements
The FAA proposes to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace LP Model Gulfstream G150 airplanes. This proposed AD was prompted by a determination that a new airworthiness limitation is necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate a new airworthiness limitation, as specified in a Civil Aviation Authority of Israel (CAAI) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Renaming Gulf of Mexico Offshore Airspace
This action is an administrative change to rename the Gulf of Mexico High and Gulf of Mexico Low offshore airspace areas. The FAA is taking this action to implement the Gulf of Mexico name changes directed in Executive Order (E.O.) 14172, Restoring Names That Honor American Greatness, published January 20, 2025. This action does not change the airspace boundaries, altitudes, or operating requirements.
Learn More✈️New Airworthiness Directive for Airbus Canada's BD-500 Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-19- 09, which applied to all Airbus Canada Limited Partnership Model BD- 500-1A10 and BD-500-1A11 airplanes. AD 2022-19-09 required repetitive inspections of the left and right main landing gear (MLG) lower spindle pins to detect corrosion and applicable repair or replacement. This AD was prompted by reports of in-service findings of corrosion on the flange of the MLG lower spindle pin. This AD continues to require certain actions in AD 2022-19-09. This AD also requires changing the tracking of flight cycles for inspections from the usage of the MLG to the usage of MLG lower spindle assemblies and replacement of affected MLG lower spindle assemblies, removes airplanes from the applicability, and prohibits the installation of affected parts under certain conditions; as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed AD on Boeing 787 Requires Inspections and Replacements
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 and 787-10 airplanes. This proposed AD was prompted by reports of multiple supplier notices of escapement (NOEs) documenting pressure deck splice fittings that were possibly manufactured with an incorrect titanium alloy material. This proposed AD would require an inspection of the attach fittings and upper splice fitting of the stub beam horizontal pressure deck (HPD) to determine the type of titanium alloy material, and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More