🚁FAA Issues Airworthiness Directive for Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. This AD was prompted by a report of a sliding door that was locked in the open position detaching from the helicopter during flight. This AD requires modifying certain upper rail rollers, installing a label on each sliding door, and prohibits installing affected upper rail rollers or a door having an affected upper rail roller. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive Proposed for Boeing 737-600 Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2013-08-08, which applies to certain The Boeing Company Model 737-600 series airplanes. AD 2013-08-08 requires repetitive inspections for cracking of the fuselage skin at certain locations at chem-mill steps, and repair if necessary. AD 2013-08-08 also provides optional terminating action for the repetitive inspections. Since the FAA issued AD 2013-08-08, Boeing has reported that the compliance times are not adequate because new fleet data indicates that crack growth is faster and more distributed between tear straps, resulting in longer cracks than originally observed in the test data that prompted AD 2013-08-08. This proposed AD would continue to require the actions in AD 2013-08- 08, at reduced initial compliance times and repetitive intervals for the inspections, and mandate post-modification inspections if the optional modification is accomplished. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directives for Bombardier Aircraft
The FAA is superseding Airworthiness Directive (AD) 2020-19- 13, which applied to certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. AD 2020-19-13 required a check to identify the manufacturer and part number of the portable oxygen bottle installation, and, if necessary, modification of the portable oxygen bottle installation. This AD continues to require the actions specified in AD 2020-19-13 and expands the applicability. This AD was prompted by a report indicating that the portable oxygen bottle installation's upper bracket latch assembly can catch on the pressure gauge tube or on the pressure gauge bezel of the portable oxygen bottle. This AD was also prompted by the determination that additional airplanes may be subject to the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Boeing 787 Aircraft
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 and 787-10 airplanes. This AD was prompted by reports that some floor beam side-of-body fittings have been manufactured with an incorrect material type. This AD requires replacing the incorrectly manufactured floor beam side-of-body fittings, inspecting the fuselage frame and fastener holes for damage, and repairing any damage. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A321 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A321-251NX, -252NX, -253NX, -271NX, and -272NX airplanes. This AD was prompted by discovery of two bushes that had migrated on the latch shaft of an emergency overwing exit door (OWED) during accomplishment of an inspection on an in-service airplane. This AD requires repetitive detailed inspections (DETs) of the affected parts and, in case of discrepancies, modification of the affected parts, and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Draft Environmental Assessment of Airworthiness Certification
The Federal Aviation Administration (FAA) announces that the Draft Programmatic Environmental Assessment and Finding of No Significant Impact (Draft PEA) for Implementation of the Modernization of Special Airworthiness Certification Rule is available for public review and comment.
Learn More✈️New FAA Airworthiness Directive for Airbus SAS Aircraft Requires Compliance
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-151N, -153N, -171N, and -173N airplanes; A320-251N, -252N, -253N, -271N, -272N, and -273N airplanes; A321-251N, -251NX, -252N, -252NX, -253N, -253NX, -253NY, -271N, -271NX, -272N, and -272NX airplanes. This AD was prompted by reports of lost synchronization between radio management panels (RMPs). This AD requires revising the existing airplane flight manual (AFM) by providing instructions to address dual loss of RMP data synchronization. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directives for Embraer Aircraft Compliance
The FAA is superseding Airworthiness Directive (AD) 2006-20- 08, which applied to all Embraer S.A. Model EMB-145, -145ER, -145MR, - 145LR, -145XR, -145MP, and -145EP airplanes. AD 2006-20-08 required repetitive inspections to detect cracking or failure of the rod ends and fittings of the aileron power control actuator (PCA), and corrective actions if necessary, and provided an optional terminating action. This AD was prompted by a determination that there was an error in identifying a maintenance task number. This AD continues to require the actions in AD 2006-20-08 and corrects an error in a task number, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA's New Airworthiness Directive for ATR Airplanes Explained
The FAA is superseding Airworthiness Directive (AD) 2023-10- 08, which applied to all ATR--GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2023-10-08 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-10-08, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-10-08 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directives for Airbus A350
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More