🚁FAA Airworthiness Directive for Airbus Helicopters Effective March 2025
The FAA is adopting a new airworthiness directive (AD) certain Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, AS355E, AS355F, AS355F1, AS355F2, AS355N, AS355NP, AS-365N2, AS 365 N3, EC 155B, EC155B1, EC225LP, SA-365N, and SA-365N1 helicopters. This AD was prompted by a report of an unintentional activation of the hoist shear-button (shear-button) on the collective pitch handle during a night flight. This AD requires checking the operation of the shear- button safety-cap on each applicable collective pitch handle and prohibits installing certain part-numbered collective pitch handles or collective sticks with those part-numbered collective pitch handles installed unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus A330 Effective March 2025
The FAA is superseding Airworthiness Directive (AD) 2022-19- 02, which applied to certain Airbus SAS Model A330-200, -200 Freighter, and -300 series airplanes; and Model A330-841 and A330-941 airplanes. AD 2022-19-02 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD-2022-19-02, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed FAA AD for Piaggio Model P-180 Airplanes Compliance
The FAA proposes to supersede Airworthiness Directive (AD) 2023-25-03, which applies to certain Piaggio Aviation S.p.A. (Piaggio) Model P-180 airplanes. AD 2023-25-03 requires a one-time detailed inspection of the horizontal stabilizer (HS) central box for corrosion; an assessment of the corrosion level; and depending on the determination, repetitive detailed inspections of the HS central box for corrosion and the internal composite structure for surface cracks, distortion, and damage; and repair or replacement of the HS assembly. Repair or replacement of the HS assembly is terminating action for the repetitive inspections. Since the FAA issued AD 2023-25-03, it was determined that AD 2023-25-03 imposed an unintended restriction that is not in the mandatory continuing airworthiness information (MCAI). This proposed AD would retain certain actions of AD-2023-25-03 and would remove the unintended restriction. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes New Airworthiness Directive Affecting Airbus Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A319-111, -112, -113, -114, -115, -131, - 132, -133 airplanes. This proposed AD was prompted by a widespread fatigue damage (WFD) scenario review for a certification project that indicated several cracks found around the potable water and wastewater service panels were WFD instead of typical fatigue. This proposed AD would require modification of the potable water and wastewater service panels, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Proposes New Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model SA341G and SA342J helicopters. This proposed AD was prompted by reports of corrosion on the contact surfaces of the tail rotor inclined and horizontal drive shaft flanges. This proposed AD would require repetitively inspecting the inclined and horizontal drive shaft flanges and, depending on the results, replacing the inclined or horizontal drive shaft. This proposed AD would also prohibit installing certain inclined and horizontal drive shafts unless certain requirements are met, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer ERJ 190-300 Air
The FAA is superseding Airworthiness Directive (AD) 2023-23- 10, which applied to all Embraer S.A. Model ERJ 190-300 airplanes. AD 2023-23-10 required repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions. Since the FAA issued AD 2023-23-10, it was determined that certain requirements needed to be clarified. This AD continues to require all actions of ANAC AD 2023-06-01 with revised compliance requirements, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Notice
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on October 21, 2024. The collection involves the member of the public that may submit an Alternative Methods of Compliance (AMOC) request to the FAA by using the Airworthiness Directives Development (ADD) External website. The information to be collected will be used to support publicly disseminated information to the FAA and/or is necessary because this information supports the Department of Transportation's strategic goal to promote the public health and safety by working toward eliminating transportation-related deaths and injuries.
Learn More✈️New Airworthiness Directive for General Electric Engines Overview
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model GEnx-1B64, GEnx-1B64/P1, GEnx-1B64/P2, GEnx-1B67, GEnx-1B67/P1, GEnx-1B67/P2, GEnx-1B70, GEnx- 1B70/75/P1, GEnx-1B70/75/P2, GEnx-1B70/P1, GEnx-1B70/P2, GEnx-1B70C/P1, GEnx-1B70C/P2, GEnx-1B74/75/P1, GEnx-1B74/75/P2, GEnx-1B76/P2, GEnx- 1B76A/P2, GEnx-2B67, GEnx-2B67B, and GEnx-2B67/P engines. This AD was prompted by a manufacturer evaluation that determined a lower life limit may be necessary for certain stages 6-10 compressor rotor spools than allowed by the engine shop manual (ESM). This AD requires a one- time inspection of the stages 6-10 spools for previously accomplished blend repairs, a one-time inspection of the blend repairs on the stages 6-10 spools for compliance with the updated allowable limits, and replacement if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁FAA Airworthiness Directive for Airbus H160-B Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model H160-B helicopters. This AD was prompted by a report of excessive axial play of the rotating scissors spherical bearings. This AD requires measuring the axial play of the rotating scissors spherical bearings and, depending on the results, accomplishing corrective action and reporting inspection results, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More