✈️FAA Airworthiness Directive
The FAA is superseding Airworthiness Directive (AD) 2020-06- 18, which applied to all Airbus SAS Model A318 series airplanes; A319 series airplanes; A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes; and A321 series airplanes. AD 2020-06-18 required replacement of affected trimmable horizontal stabilizer actuators (THSAs) with serviceable THSAs. Since the FAA issued AD 2020-06-18, a new Airbus airplane model (A321-253NY) has been certified, on which affected parts could be installed in service. This AD continues to require the actions in AD 2020-06-18, revises the applicability to include Model A321-253NY airplanes, and prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Airworthiness Directive Requires Compliance for Specific Aviation Buckles
The FAA is adopting a new airworthiness directive (AD) for all airplanes with certain Pacific Scientific Company rotary buckle assemblies (buckles) installed. This AD was prompted by a report of a manufacturing defect in the screws used inside the buckle. This AD requires inspecting the buckle screws, and depending on the results, reidentifying the buckle, replacing the screws and reidentifying the buckle, or replacing the buckle. This AD also allows optionally prohibiting use of the seat until the actions required by this AD are accomplished. This AD also prohibits installing certain buckles on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus SAS Aircraft Compliance
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-112 and -132 airplanes, and Model A320- 214, -232, -233, -251N, and -271N airplanes. This AD was prompted by rivet holes being left unplugged after bracket relocation or removal accomplished during certain modifications, potentially resulting in fatigue damage starting from those rivet holes. This AD requires a one- time special detailed inspection (SDI) of the rivet holes and applicable corrective actions; and allows the installation of certain modifications, provided rivets are installed after the modification. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Special Conditions for Gulfstream GVI Therapeutic Oxygen System
These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) Model GVI airplane. This airplane, as modified by Jet Aviation AG, will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is an oxygen distribution system that provides a shared source of oxygen between the flightcrew and passengers to provide supplemental and therapeutic oxygen. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Learn More✈️FAA Airworthiness Directive for Airbus Aircraft Compliance Guidelines
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A319-151N, -153N, -171N, and -173N airplanes; Model A320-251N, -252N, -253N, -271N, -272N, and -273N airplanes; and Model A321-251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, -272NX, -253NY, and -271NY airplanes. This AD was prompted by occurrences of high-pressure bleed valve (HPV) butterfly seal retention clip rupture. This AD requires revising the existing airplane flight manual (AFM) and the existing FAA-approved minimum equipment list (MEL), allows replacement of each affected HPV as an optional terminating action, and prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus Canada Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This AD was prompted by a report of multiple in-service failures of engine feed check valves, which have resulted in fuel imbalance conditions in flight. This AD requires repetitive replacement of the left-and right-side engine feed check valves with new engine feed check valves and prohibits flight dispatch under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Airbus Model Airplanes Compliance
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a heavy maintenance check that found elongation on the upper section of the vertical member's assembly at the frame (FR) 24A cargo panel sub-structure. This AD requires a check for certain repairs, and as applicable, repetitive detailed visual inspections of the vertical member's upper part and the upper fittings at FR 24A in the forward cargo compartment and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️BAE Systems Airworthiness Directives Compliance Updates
The FAA is superseding Airworthiness Directive (AD) 2023-02- 06, which applied to all BAE Systems (Operations) Limited Model 4101 airplanes. AD 2023-02-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-02- 06, new or more restrictive airworthiness limitations have been developed. This AD continues to require certain actions in AD 2023-02- 06 and requires revising the existing maintenance or inspection program, as applicable to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues New Airworthiness Directive for Bombardier Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 airplanes. This AD was prompted by a report indicating that the clearance between therapeutic flexible oxygen hoses and electrical harnesses may be non-compliant to design requirements, and that positive separation mechanisms and appropriate protective barriers may not have been installed in accordance with the applicable installation standards. This AD requires a detailed inspection of the therapeutic flexible oxygen hose for damage and protection, and the electrical harnesses for damage; a detailed inspection for the clearance between the therapeutic oxygen rigid tube to oxygen hose elbow fitting (also referred to as elbow fitting), if applicable, and the nearest electrical harness, and between the therapeutic flexible oxygen hose and electrical harness; and applicable related investigative and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Bombardier Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Bombardier Inc. Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by a report of uncommanded nose wheel steering upon landing with touchdown on the runway centerline. This proposed AD would require replacing the nosewheel steering potentiometer universal coupling setscrews. This proposed AD would also require revising the existing maintenance or inspection program, as applicable, to incorporate new life limits for the setscrews. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More