✈️New FAA Airworthiness Directive for Boeing 787 Safety Compliance
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of water leakage from the potable water system due to improperly installed waterline couplings, and water leaking into the electronics equipment (EE) bays from above the floor in the main cabin, resulting in water on the equipment in the EE bays. This AD requires an inspection of seat tracks above the EE bays for missing, damaged, or deteriorated sealant, moisture barrier tape, or tape dams, as applicable, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for MHI RJ Aviation Compliance
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports that the cockpit voice recorder (CVR) impact switch was installed in the wrong direction. This AD requires an inspection of the CVR impact switch installation to confirm that the reset switch faces forward, and applicable on-condition actions, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Request for Comments on National Security Investigation of Aircraft Imports
On May 1, 2025, the Secretary of Commerce initiated an investigation to determine the effects on the national security of imports of commercial aircraft and jet engines, and parts for commercial aircraft and jet engines. This investigation has been initiated under section 232 of the Trade Expansion Act of 1962, as amended (Section 232). Interested parties are invited to submit written comments, data, analyses, or other information pertinent to the investigation to the Department of Commerce's (Department) Bureau of Industry and Security (BIS), Office of Strategic Industries and Economic Security. This notice identifies issues on which the Department is especially interested in obtaining the public's views.
Learn More✈️Proposed FAA Airworthiness Directives for Airbus Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-23-04, which applies to all Airbus SAS Model A300 B4-600R series airplanes; all Model A300 B4-603, B4-620, and B4-622 airplanes; all Model A300 C4-605R Variant F airplanes; and certain Model A300 F4-605R airplanes. AD 2017-23-04 requires an inspection of the upper wing skin and top stringer joints, and modification of the stringer joint couplings if necessary. Since the FAA issued AD 2017-23-04, it has been determined that additional airplanes may be subject to the identified unsafe condition. This proposed AD would continue to require the actions in AD 2017-23-04 and would add airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). This proposed AD would also remove certain airplanes from the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁New FAA Airworthiness Directive for Leonardo S.p.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.A. Model A119 and AW119 MKII helicopters. This AD was prompted by a report of an electrical failure of the starter-generator, due to a rupture of the drive shaft, which resulted in a partial loss of battery power. This AD requires installing a battery discharge detector and revising the existing Rotorcraft Flight Manual (RFM) for the helicopter. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁FAA Issues Airworthiness Directive for Leonardo Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.A. Model A109E, A109S, and AW109SP helicopters. This AD was prompted by reports of incorrect installation of the motor (MTR) cables and the bonding braids connected to the engine fire extinguisher bottles. This AD requires inspecting the cables and bonding braids installation and, depending on the results, accomplishing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC 130 B4 and EC 130 T2 helicopters. This proposed AD was prompted by a report of heavy damage on the fenestron due to the loss of the tail rotor (TR) blade, which broke at the TR hub tension-torsion bar (tension-torsion bar). This proposed AD would require inspecting the tension-torsion bar and, depending on the inspection results, taking corrective actions. This proposed AD would also prohibit performing maintenance using certain maintenance manuals. These proposed actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🚁FAA Proposes New Airworthiness Directive for Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Deutschland GmbH (AHD) Model MBB-BK 117 D-3 helicopters. This proposed AD was prompted by reports of momentary direct current (DC) power interruption in flight of both essential busses. This proposed AD would require revising the existing rotorcraft flight manual (RFM) for your helicopter, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️New Airworthiness Directive for Boeing Airplanes Addresses Elevator Safety
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD- 83), DC 9-87 (MD-87), and MD-88 airplanes, and Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD was prompted by the discovery of jammed elevators during takeoff. This AD requires revising the "Certificate Limitations" section of the existing airplane flight manual (AFM) to include a procedure to confirm elevator surfaces are not jammed in the trailing edge down (TED) position. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More🚁New Airworthiness Directive for Airbus Helicopters Announced
The FAA is superseding Airworthiness Directive (AD) 2021-09-14 which applied to certain Airbus Helicopters (Airbus) Model SA330J helicopters. AD 2021-09-14 required repetitively inspecting for a gap between the main gearbox (MGB) oil cooling fan assembly (fan) rotor blade and the upper section of the guide vane bearing housing, installing improved MGB fan rotor shaft bearings, and repetitively inspecting the improved MGB fan rotor shaft bearings. Since the FAA issued AD 2021-09-14, Airbus has developed modifications to the components of the MGB fan bearing assembly and issued new material regarding these modifications. This AD retains the actions required by AD 2021-09-14 and also requires installing the improved MGB fan rotor bearing assembly, which constitutes terminating action for the repetitive inspections. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More