🏛️Executive Order Addressing Risks from Susman Godfrey LLP
Executive Order 14263 aims to restrict access to government contracts and privileges for Susman Godfrey LLP due to allegations of detrimental activities and unlawful discrimination. The order includes provisions for the review of security clearances and mandates government agencies to address contracts with Susman, aligning with national interests and prioritizing compliance with federal laws.
Learn More✈️Proposed FAA Airworthiness Directive for MHI RJ Aviation Aircraft
The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), Model CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000). This proposed AD was prompted by an engine indicating and crew alerting system (EICAS) STAB TRIM Caution message that was posted, and subsequent repair that found prematurely worn teeth on a rubber bull gear (RBG) wheel in the horizontal stabilizer trim actuator (HSTA). This proposed AD would require an inspection for part numbers and on-condition replacement of affected RBG wheels and prohibit the installation of affected parts under certain conditions, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More🏥National Arthritis Advisory Council Meeting and Grant Opportunities
The National Institutes of Health announces a public advisory council meeting regarding arthritis and musculoskeletal diseases. The meeting will address procedural updates, grant evaluations, and opportunities for public comment. Attendees can participate both virtually and in-person, with provisions for special assistance available.
Learn More✈️Proposed FAA Airworthiness Directive for Boeing Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by a report of under-torqued and missing nuts on the horizontal stabilizer trim actuator (HSTA) lower gimbal assembly. This proposed AD would require a review of maintenance records to determine if an overhauled HSTA was inspected and corrective actions were accomplished using certain service information, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More⚔️Modernizing Defense Acquisitions and Boosting Innovation
Executive Order 14265 is focused on reforming the defense acquisition processes to enhance procurement efficiency and innovation within the U.S. defense industrial base. It emphasizes the need for a comprehensive overhaul to boost military capabilities, streamline compliance, and incentivize risk-taking and innovative solutions within the defense sector. The order mandates a review of acquisition programs and workforce restructuring to align with strategic objectives.
Learn More⚖️Camin Cargo Control Approved as Commercial Gauger by CBP
Notice is hereby given, pursuant to CBP regulations, that Camin Cargo Control, Inc. (Baytown, TX), has been approved to gauge petroleum and certain petroleum products for customs purposes for the next three years as of April 16, 2024.
Learn More✈️Proposed Airworthiness Directive for CFM International Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2023-23-12, which applies to all CFM International, S.A. (CFM) Model LEAP-1B21, LEAP-1B23, LEAP-1B25, LEAP-1B27, LEAP-1B28, LEAP-1B28B1, LEAP-1B28B2, LEAP-1B28B2C, LEAP-1B28B3, LEAP-1B28BBJ1, and LEAP- 1B28BBJ2 (LEAP-1B) engines. AD 2023-23-12 requires replacing certain high-pressure turbine (HPT) rotor stage 1 disks and a certain compressor rotor stages 6-10 spool. Since the FAA issued AD 2023-23-12, the manufacturer has identified additional parts that were manufactured from material suspected to have reduced material properties due to iron inclusion, which prompted this proposed AD. This proposed AD would retain the requirements to replace certain HPT rotor stage 1 disks and a certain compressor rotor stages 6-10 spool. This proposed AD would also expand the applicability to include additional affected HPT rotor stage 1 disks that were manufactured from the same material suspected to have reduced material properties due to iron inclusion. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More⚖️Alignment of Countervailing Duty Determination for Slag Pots
This notice addresses the alignment of final countervailing duty determination with the final less-than-fair-value determination for slag pots imported from China. It confirms that the final determinations will be made concurrently, influencing compliance and operational strategies for stakeholders in the steel industry.
Learn More💧Preliminary Permit Application for Western Navajo Pumped Storage Project
The Department of Energy accepted a preliminary permit application for the Western Navajo Pumped Storage Project, proposing new hydropower facilities in Arizona. The project aims to study feasibility and includes substantial infrastructure, such as reservoirs and a powerhouse. The project location is on federal land held in trust for the Navajo Nation, engaging various stakeholders and allowing public comments on the proposal.
Learn More🚢Certificate of Alternative Compliance Issued for M/V FALCON
The Coast Guard announces that the Chief of Prevention Division, Seventh District has issued a certificate of alternative compliance from the International Regulations for Preventing Collisions at Sea, 1972 (72 COLREGS), for the M/V FALCON (O.N. 1824383). We are issuing this notice because its publication is required by statute. Due to the construction and placement of the masthead light, stern light, and sidelights, M/V FALCON cannot fully comply with the light, shape, or sound signal provisions of the 72 COLREGS without interfering with the vessel's design and construction. This notification of the issuance of these certificates of alternative compliance promotes the Coast Guard's marine safety mission.
Learn More