⚛️NRC Updates Regulatory Guide on ASME Code Cases for Nuclear Plants
The U.S. Nuclear Regulatory Commission (NRC) is amending its regulations to incorporate by reference a regulatory guide that approves unconditioned code cases published by the American Society of Mechanical Engineers (ASME). This action allows nuclear power plant applicants and licensees to use the code cases as voluntary alternatives to engineering standards for nuclear power plant components. These standards are set forth in the ASME Boiler and Pressure Vessel Code and ASME Operation and Maintenance of Nuclear Power Plants, which are currently incorporated by reference into the NRC's regulations.
Learn More⚛️NRC Proposes Approval of ASME Unconditioned Code Cases
The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations to incorporate by reference a regulatory guide that approves unconditioned code cases published by the American Society of Mechanical Engineers (ASME). This action would allow nuclear power plant applicants and licensees to use the code cases as voluntary alternatives to engineering standards for nuclear power plant components. These standards are set forth in the ASME Boiler and Pressure Vessel Code and ASME Operation and Maintenance of Nuclear Power Plants, which are currently incorporated by reference into the NRC's regulations. The NRC is requesting comments on this proposed rule.
Learn More⚛️Amendment to Certificate of Compliance 1042 for Spent Fuel Storage
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the TN Americas LLC, NUHOMS[supreg] EOS Dry Spent Fuel Storage System listing within the "List of approved spent fuel storage casks" to include Amendment No. 4 to Certificate of Compliance No. 1042. Amendment No. 4 changes the certificate of compliance to incorporate a method to determine new loading patterns, introduce a steel plate composite option, introduce the use of MAVRIC software for a confirmatory run of the HSM-MX dose rates, make technical specification changes for consistency and terminology clarification, make various updated final safety analysis report editorial corrections for consistency and clarification, add measured exposures from past loading campaigns, allow use of a blended Portland cement, change the use of the MX-Loading Crane, and clarify the scenarios under which the maximum heat loads can be reduced.
Learn More⚛️Amendment 15 to Approved Spent Fuel Storage Casks Regulations
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the NAC International, Inc. MAGNASTOR[supreg] Storage System listing within the "List of approved spent fuel storage casks" to include Amendment No. 15 to Certificate of Compliance No. 1031. Amendment No. 15 revises the certificate of compliance to add a new variation of the Lightweight MAGNASTOR[supreg] Transfer Cask design, add a new concrete cask design, increase the maximum system head load capacity, add new loading patterns, add a thermal shunt for short loading patterns, remove the 5 percent burnup penalty, increase Passive MAGNASTOR[supreg] Transfer Cask heat load, add two new pressurized-water reactor fuel types to support future operations, modify the transportable storage canister lid to allow additional clearance near the top center of the basket, and correct and clarify principal design criteria, operating procedures, and the acceptance criteria and maintenance program. This amendment also makes corresponding revisions to previously approved drawings for the concrete cask, Technical Specifications Appendix A and Appendix B, specific chapters of the final safety analysis report, and several license drawings.
Learn More⚛️NRC Updates Spent Fuel Storage Regulations for HI-STORM 100 Cask System
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the Holtec International HI- STORM 100 Cask System listing within the "List of approved spent fuel storage casks" to include Renewed Amendment No. 19 to Certificate of Compliance No. 1014. Renewed Amendment No. 19 revises the certificate of compliance to update the acceptance criteria and method of evaluation (MOE) for the HI-STORM 100 system tipover accident for equipment combinations involving multi-purpose canisters (MPCs) with Metamic-HT baskets. This involves applying a new stress-based criteria and completing new evaluations consistent with the new tipover acceptance criteria and MOE and involves some adjustments of the existing deflection criteria.
Learn More⚛️NRC Amendments to NAC-MPC System Impacting Spent Fuel Storage
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the NAC Multi-Purpose Canister (NAC-MPC) System listing within the "List of approved spent fuel storage casks" to include Amendment No. 9 and revise Amendment Nos. 6, 7, and 8 to Certificate of Compliance (CoC) No. 1025. The addition of Amendment No. 9 and the revisions to Amendment Nos. 6, 7, and 8 amend the description of the vertical concrete cask (VCC) in the CoC and technical specifications to make a distinction between the VCC body and the VCC lid, in terms of applicability of the American Concrete Institute (ACI) Specifications ACI 349 and ACI 318.
Learn More🛡️Holtec HI-STORM UMAX Storage System Compliance Updates
The U.S. Nuclear Regulatory Commission (NRC) is amending its spent fuel storage regulations by revising the Holtec International HI- STORM UMAX Canister Storage System listing within the "List of approved spent fuel storage casks" to include Revision 1 to Amendment Nos. 0 through 2 to Certificate of Compliance (CoC) No. 1040. Revision 1 to Amendment Nos. 0 through 2 updates the CoC appendix A technical specifications for radiation protection and the associated bases information to clearly articulate the basis for the dose rate limits for the closure lids, modify the dose rate limit values and the description of the location of the dose rate measurements, and make other editorial changes.
Learn More⚖️Regulatory Updates for Federal Mine Safety and Health Compliance
The Federal Mine Safety and Health Review Commission (the "Commission") is an independent adjudicatory agency that provides trials and appellate review of cases arising under the Federal Mine Safety and Health Act of 1977 (the "Mine Act"). Trials are held before the Commission's Administrative Law Judges, and appellate review is provided by a five-member Review Commission appointed by the President and confirmed by the Senate. This rule makes final revisions to many of the Commission's procedural rules. The Commission makes these changes in a continued effort to ensure the just, speedy, and inexpensive determination of all proceedings before the Commission.
Learn More🏛️DOJ Final Rule on Office of Legal Policy Organizational Changes
This rule amends the Code of Federal Regulations to update the organizational description of the Office of Legal Policy to reflect current practice.
Learn More⚖️New AMLA Regulations on Whistleblower Retaliation Procedures
This document provides the interim final text of regulations governing the anti-retaliation provisions of the Anti-Money Laundering Act of 2020 (AMLA or the Act). This rule establishes procedures and timeframes for the handling of retaliation complaints under AMLA, including procedures and timeframes for complaints to the Occupational Safety and Health Administration (OSHA), investigations by OSHA, appeals of OSHA determinations to an administrative law judge (ALJ) for a hearing de novo, hearings by ALJs, review of ALJ decisions by the Administrative Review Board (ARB) (acting on behalf of the Secretary of Labor (Secretary)), and judicial review of the Secretary's final decision. It also sets forth the Secretary's interpretations of the AMLA anti-retaliation provision on certain matters.
Learn More