✈️Proposed Airworthiness Directive for Embraer EMB-505 Airlines
The FAA proposes to supersede Airworthiness Directive (AD) 2023-22-11, which applies to certain Embraer S.A. (Embraer) Model EMB- 505 airplanes. AD 2023-22-11 requires repetitively replacing the clutch retaining bolt and washer of the aileron autopilot servo mount. Since the FAA issued AD 2023-22-11, the FAA has determined that the applicability should be expanded to include all Model EMB-505 airplanes and, for certain airplanes, an additional requirement is necessary for the initial replacement of the retaining bolt and washer. This proposed AD would also provide an optional terminating action for the repetitive retaining bolt and washer replacement. These actions are specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer Airplanes' Safety Compliance
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model ERJ 190-300 and ERJ 190-400 airplanes. This AD was prompted by a report of a MAU 3B failure which led to brake fault advisory messages followed by loss of normal braking that was undetected until the brakes were pressed by the pilots. This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures associated with the failure of certain modular avionics units (MAUs), as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Embraer S.A. Airplanes by FAA
The FAA proposes to adopt a new airworthiness directive (AD) for all Embraer S.A. Model EMB-545 and EMB-550 airplanes. This proposed AD was prompted by a jamming failure of the main door lock sensor. This proposed AD would require repetitive main door sensor operational tests, repetitive lubrication of the main door sensor mechanism, and on-condition actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD. The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer EMB-120 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-120, -120ER, -120FC, -120QC, and -120RT airplanes. This AD was prompted by a structural assessment, which found that the fuselage longitudinal skin splice and panel between certain frames are susceptible to cracking. This AD requires performing repetitive inspections of the fuselage center I longitudinal skin splice and applicable corrective actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Embraer Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-25- 07, which applied to all Embraer S.A. Model ERJ 170-100 LR, -100 STD, - 100 SE, and -100 SU airplanes; and Model ERJ 170-200 LR, -200 SU, -200 STD, and -200 LL airplanes. AD 2022-25-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require all actions in AD 2022-25-07 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, and certain structural modifications, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️FAA Issues Airworthiness Directive for Embraer Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model EMB-135ER, -135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145EP, -145ER, -145LR, -145MP, -145MR, and -145XR airplanes. This AD was prompted by a structural assessment that indicated certain central fuselage longitudinal splices are subjected to fatigue damage on multiple sites due to loose fasteners, which may reduce the structural residual strength below the required levels. This AD requires performing repetitive inspections of certain upper central fuselage longitudinal splices and reporting the inspection results, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. This AD also requires performing corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️Proposed Airworthiness Directive for Embraer Aircraft by FAA
The FAA proposes to supersede Airworthiness Directive (AD) 2006-20-08, which applies to all Embraer S.A. Model EMB-145, -145ER, - 145MR, -145LR, -145XR, -145MP, and -145EP airplanes. AD 2006-20-08 requires repetitive inspections to detect cracking or failure of the rod ends and fittings of the aileron power control actuator (PCA) and corrective actions if necessary, and provides an optional terminating action. Since the FAA issued AD 2006-20-08, it has been determined that there was an error in identifying a maintenance task number. This proposed AD would continue to require the actions in AD 2006-20-08 and corrects an error in a task number, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Learn More✈️FAA Airworthiness Directive for Embraer ERJ 190-300 Air
The FAA is superseding Airworthiness Directive (AD) 2023-23- 10, which applied to all Embraer S.A. Model ERJ 190-300 airplanes. AD 2023-23-10 required repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions. Since the FAA issued AD 2023-23-10, it was determined that certain requirements needed to be clarified. This AD continues to require all actions of ANAC AD 2023-06-01 with revised compliance requirements, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More✈️New FAA Airworthiness Directive for Embraer Model ERJ 190-400
The FAA is superseding Airworthiness Directive (AD) 2023-23- 09, which applied to all Embraer S.A. Model ERJ 190-400 airplanes. AD 2023-23-09 required repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions. Since the FAA issued AD 2023-23-09, it was determined that certain requirements needed to be clarified. This AD continues to require all actions of ANAC AD 2023-05-02 with revised compliance requirements, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Learn More